Revlon 473 Thermal Cutout Replacement - iFixit 维修指南

你所需要的

步骤 1 Shell

Revlon 473 Thermal Cutout Replacement, Shell: 步骤 1 中的图像 1，1

Before disassembly, make sure that the device is unplugged.
Remove the two 17.83 mm black screws located on the handle.

步骤 2

Revlon 473 Thermal Cutout Replacement: 步骤 2 中的图像 1，1

Separate the shell from the main component.
Check to ensure each piece is free from debris.

步骤 3

Revlon 473 Thermal Cutout Replacement: 步骤 3 中的图像 1，3

Revlon 473 Thermal Cutout Replacement: 步骤 3 中的图像 2，3

Revlon 473 Thermal Cutout Replacement: 步骤 3 中的图像 3，3

Remove the casing from the heating element.
For reassembly, reattach the silver casing before the black cover.

步骤 4 Thermal Cutout

Revlon 473 Thermal Cutout Replacement, Thermal Cutout: 步骤 4 中的图像 1，1

Locate the thermal cutout under the coils of the heating element.

步骤 5

Revlon 473 Thermal Cutout Replacement: 步骤 5 中的图像 1，1

Test the thermal cutout for continuity using the multimeter.
Make sure the multimeter is set to 200 ACV and bring the probes toward the thermal cutout.
If the numbers on the multimeter continue to change, the circuit is closed and properly functioning.
If the multimeter reads a consistent number, the circuit is opened and the thermal cutout needs to be replaced.

步骤 6

Revlon 473 Thermal Cutout Replacement: 步骤 6 中的图像 1，1

To replace the thermal cutout, use the spudgers to extract the object.
To remove, wedge it back and forth until it comes free.
You do not need to take out the gold piece, only the thermal cutout.

步骤 7

Revlon 473 Thermal Cutout Replacement: 步骤 7 中的图像 1，1

Replace the old thermal cutout with a new thermal cutout by snapping it into place.

结论

To reassemble your device, follow these instructions in reverse order.

作者

与3其他贡献者

Jessica Leyva

于09/18/12注册

143 声望

创作了5篇指南

+ 5更多徽章

团队

Cal Poly, Team 1-5, Propen Fall 2012 Cal Poly, Team 1-5, Propen Fall 2012 的会员

CPSU-PROPEN-F12S1G5

3 名成员

创作了5篇指南

0条评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 2

总计 1,857