简介

Patch your jeans with a reverse applique. This technique is great for holes that have a large chunk of cloth missing. You can cut any shape and use any color fabric for the patch, so long as it is heavy-weight fabric.

For replacement parts or further assistance, contact Patagonia Customer Service.

  1. Examine the damage. Clip any long threads, and remove any debris from the hole.
    • Examine the damage. Clip any long threads, and remove any debris from the hole.

    • Measure the damaged area.

      • In our case it looks to be 2" by 2".

    添加评论

  2. Draw any the shape you'd like your patch to be on a piece of paper. Be sure your design is at least 1/8" larger than the damaged area.
    • Draw any the shape you'd like your patch to be on a piece of paper. Be sure your design is at least 1/8" larger than the damaged area.

    • Cut out your design.

    添加评论

    • Lay the cutout of your design over the hole in the jeans to make sure that it is the correct size and looks how you want it to.

    添加评论

    • Using a pencil, pen, or tailor's chalk, trace the design onto the jeans.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Cut the design out of your jeans.

    • Be sure to only cut one layer of denim, or you will cut through the back of your jeans and need two patches!

    添加评论

    • Take the scrap of fabric you will use for a patch and insert it into the hole.

    添加评论

    • Slide the pant leg with the patch over the arm of the sewing machine.

    • You may need to remove the sewing machine table for the pant to fit over the sewing machine.

    • If you are still having trouble getting the pant around the arm of the sewing machine, you can rip the side seam of the pant leg to allow room to sew.

    • Be sure that the pant leg is around the arm, and that you are not accidentally sewing the two layers of the pant leg together.

    添加评论

    • Adjust the sewing machine for a zig-zag stitch.

    • Set the stitch length to just under 1/2.

    添加评论

    • Align the edge of the patch with the center of the pressor foot.

    • Be sure that the patch is laying flat.

    • Lower the pressor foot.

    • Begin sewing the zig-zag stitch, following the edge of the hole so that the zig-zag stitch covers the area where the two fabrics meet.

    添加评论

    • Sew all the way around the patch.

    • Overlap the stitching at the end with the first two or three stitches.

    添加评论

    • Lift the pressor foot and needle.

    • Slide the pant leg off of the arm of the sewing machine.

    • Clip any threads, and admire your work.

    添加评论

终点

4等其他人完成本指南。

Brittany McCrigler

于2012年03月05日注册

80,076 信誉积分

创作了132篇指南

团队

iFixit iFixit 的会员

Community

113 名成员

创作了7,343篇指南

To keep the pattern from entirely fraying or catching on things, it may also help to flip the pants right-side-out and sew again around the pattern edge with the zigzag or a flat stitch.

Alisa - 回复

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 21

过去的30天: 104

总计 3,342