修复你的物品 社区 商店

Retro-Bit Retro Duo Controller Button and Pad Replacement.

简介

If your controller(s) have button malfunctions, they can be replaced.

你所需要的

  1. Retro-Bit Retro Duo Controller Button and Pad Replacement., Buttons and Pads in Controller(s): 步骤 1 中的图像 1，3 Retro-Bit Retro Duo Controller Button and Pad Replacement., Buttons and Pads in Controller(s): 步骤 1 中的图像 2，3 Retro-Bit Retro Duo Controller Button and Pad Replacement., Buttons and Pads in Controller(s): 步骤 1 中的图像 3，3

    • With the controller on its face, remove the five 6 mm Phillips #1 screws.

    • After screw removal, carefully lift the controller casing.

    翻译

  2. Retro-Bit Retro Duo Controller Button and Pad Replacement.: 步骤 2 中的图像 1，3 Retro-Bit Retro Duo Controller Button and Pad Replacement.: 步骤 2 中的图像 2，3 Retro-Bit Retro Duo Controller Button and Pad Replacement.: 步骤 2 中的图像 3，3

    • Pinch the top and bottom of the shoulder pads, then lift out.

    • There are small elastic pads below each shoulder pad. Replace these if they are not functioning correctly.

    翻译

  4. Retro-Bit Retro Duo Controller Button and Pad Replacement.: 步骤 3 中的图像 1，3 Retro-Bit Retro Duo Controller Button and Pad Replacement.: 步骤 3 中的图像 2，3 Retro-Bit Retro Duo Controller Button and Pad Replacement.: 步骤 3 中的图像 3，3

    • Carefully lift the circuit board from the controller case.

    翻译

  5. Retro-Bit Retro Duo Controller Button and Pad Replacement.: 步骤 4 中的图像 1，3 Retro-Bit Retro Duo Controller Button and Pad Replacement.: 步骤 4 中的图像 2，3 Retro-Bit Retro Duo Controller Button and Pad Replacement.: 步骤 4 中的图像 3，3

    • To replace the action button pad, lift this part out.

    • Lift the Select and Start button pad.

    • If replacing the D-Pad, lift this pad.

    • Pinch and lift the shoulder button pads.

    翻译

  6. Retro-Bit Retro Duo Controller Button and Pad Replacement.: 步骤 5 中的图像 1，3 Retro-Bit Retro Duo Controller Button and Pad Replacement.: 步骤 5 中的图像 2，3 Retro-Bit Retro Duo Controller Button and Pad Replacement.: 步骤 5 中的图像 3，3

    • Support the controller face and push buttons toward the inner case.

    • Use care. The buttons have a tiny tab to keep them in place.

    • Support the controller face and push the D-Pad toward the inner case.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

作者

与3其他贡献者

Evelyn

于09/25/17注册

223 声望

创作了2篇指南

徽章: 4

+1个徽章

团队

USF Tampa, Team S4-G4, Eyestone Fall 2017 USF Tampa, Team S4-G4, Eyestone Fall 2017 的会员

USFT-EYESTONE-F17S4G4

3 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 10

过去 30 天： 16

总计 1,180