跳转到主内容

Respironics REMstar Plus M Series Power Supply Circuit board Replacement

你所需要的

  1. Respironics REMstar Plus M Series Power Supply Circuit board Replacement, Power Supply Circuit board: 步骤 1 中的图像 1,3 Respironics REMstar Plus M Series Power Supply Circuit board Replacement, Power Supply Circuit board: 步骤 1 中的图像 2,3 Respironics REMstar Plus M Series Power Supply Circuit board Replacement, Power Supply Circuit board: 步骤 1 中的图像 3,3
    • Place the device face down.

    • Use a T15 Torx screwdriver to remove the six screws in the base plate.

    • Lift the base plate off of the device.

  2. Respironics REMstar Plus M Series Power Supply Circuit board Replacement: 步骤 2 中的图像 1,3 Respironics REMstar Plus M Series Power Supply Circuit board Replacement: 步骤 2 中的图像 2,3 Respironics REMstar Plus M Series Power Supply Circuit board Replacement: 步骤 2 中的图像 3,3
    • Flip the circuit board over to the right.

    • Gently pull the ribbon cable outward to disconnect it from the circuit board.

  3. Respironics REMstar Plus M Series Power Supply Circuit board Replacement: 步骤 3 中的图像 1,2 Respironics REMstar Plus M Series Power Supply Circuit board Replacement: 步骤 3 中的图像 2,2
    • Disconnect the red 3-wire plug at the top left of the board and the white 4-wire plug at the bottom left.

    • Remove the circuit board.

结论

To reassemble your device, follow these instructions in reverse order.

2条评论

My unit stops working in the middle of the night, then beeps, & blue light flashes. Will replacing this board fix this, and where can I get one?

mert454 - 回复

Where to find a power supply circuit board for my Remstar plus m series which just blinks blue lights. dledes@shaw.ca

David Edes - 回复

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 6

过去 30 天: 22

总计 981