修复你的物品 社区 商店

ResMed AirSense 10 Wireless Communication Board Replacement

医疗设备
ifixit 或本维修指南均未获得医疗设备制造商的认可或与任何制造商存在附属关系。

简介

If your device is having internet or network issues, the cause might be a broken wireless communication board. If this is the cause, this guide can help you to replace the broken board.

Be sure to confirm that the internet issues are due to the device itself. The wifi network it is connected to could also be the cause of the problems. To easily test this, just make sure other devices can connect to the internet properly.

你所需要的

  1. ResMed AirSense 10 Wireless Communication Board Replacement, Top Cover: 步骤 1 中的图像 1，2 ResMed AirSense 10 Wireless Communication Board Replacement, Top Cover: 步骤 1 中的图像 2，2

    • Remove the water tub by gently pulling it out.

    编辑

  2. ResMed AirSense 10 Wireless Communication Board Replacement: 步骤 2 中的图像 1，3 ResMed AirSense 10 Wireless Communication Board Replacement: 步骤 2 中的图像 2，3 ResMed AirSense 10 Wireless Communication Board Replacement: 步骤 2 中的图像 3，3

    • Pry off the face plate by using your finger or an opening tool.

    • Use a moderate amount of force when prying open.

    • Remove the face plate from the top cover.

    • There will be a clicking sound on either side of the divot when assembling and disassembling.

    编辑

  3. ResMed AirSense 10 Wireless Communication Board Replacement: 步骤 3 中的图像 1，2 ResMed AirSense 10 Wireless Communication Board Replacement: 步骤 3 中的图像 2，2

    • Unscrew and remove the two 11.8 mm TR10 Torx screws that were revealed from the face plate being removed.

    编辑

  4. ResMed AirSense 10 Wireless Communication Board Replacement: 步骤 4 中的图像 1，2 ResMed AirSense 10 Wireless Communication Board Replacement: 步骤 4 中的图像 2，2

    • Unscrew and remove the two 11.8 mm TR10 Torx screws from the bottom of the device.

    编辑

  5. ResMed AirSense 10 Wireless Communication Board Replacement: 步骤 5 中的图像 1，3 ResMed AirSense 10 Wireless Communication Board Replacement: 步骤 5 中的图像 2，3 ResMed AirSense 10 Wireless Communication Board Replacement: 步骤 5 中的图像 3，3

    • Remove the top cover from the rest of the device.

    编辑

  6. ResMed AirSense 10 Wireless Communication Board Replacement, Wireless Communication Board: 步骤 6 中的图像 1，3 ResMed AirSense 10 Wireless Communication Board Replacement, Wireless Communication Board: 步骤 6 中的图像 2，3 ResMed AirSense 10 Wireless Communication Board Replacement, Wireless Communication Board: 步骤 6 中的图像 3，3

    • Place a halberd spudger behind the connector cable.

    • Use a halberd spudger to pull the connector away from the motherboard.

    编辑

  7. ResMed AirSense 10 Wireless Communication Board Replacement: 步骤 7 中的图像 1，2 ResMed AirSense 10 Wireless Communication Board Replacement: 步骤 7 中的图像 2，2

    • Unscrew and remove the two 11.8 mm TR10 Torx screws from the bottom of the device.

    编辑

  8. ResMed AirSense 10 Wireless Communication Board Replacement: 步骤 8 中的图像 1，2 ResMed AirSense 10 Wireless Communication Board Replacement: 步骤 8 中的图像 2，2

    • Insert a plastic opening tool in between the side and bottom panel.

    • Pry the side panel away from the bottom panel with the plastic opening tool.

    • Remove the side panel by pulling it away from the device.

    编辑

  9. ResMed AirSense 10 Wireless Communication Board Replacement: 步骤 9 中的图像 1，2 ResMed AirSense 10 Wireless Communication Board Replacement: 步骤 9 中的图像 2，2

    • Push in the clips which secure the board to the side panel with the plastic opening tool.

    编辑

  10. ResMed AirSense 10 Wireless Communication Board Replacement: 步骤 10 中的图像 1，2 ResMed AirSense 10 Wireless Communication Board Replacement: 步骤 10 中的图像 2，2

    • Remove the wireless communication board from the side panel.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

一条评论

I have an early ResMed Airsense 10 and my wireless comm board was 3G. Can this be updated with a replacement board?

Lynd Mccormick - 回复

添加评论

浏览统计数据:

过去 24 小时： 3

过去 7 天： 8

过去 30 天： 43

总计 1,326