修复你的物品 社区 商店

ResMed AirSense 10 Air Intake Filter Replacement

医疗设备
ifixit 或本维修指南均未获得医疗设备制造商的认可或与任何制造商存在附属关系。

简介

This guide will explain how to replace the air intake filter in the ResMed AirSense 10 ventilator. Regularly check the intake air filter to prevent the entry of dust and water. Replace the intake air filter every 6 months or if there are any damages or blockages to the filter.

你所需要的

  1. ResMed AirSense 10 Air Intake Filter Replacement, Air Intake Filter: 步骤 1 中的图像 1，2 ResMed AirSense 10 Air Intake Filter Replacement, Air Intake Filter: 步骤 1 中的图像 2，2

    • The air filter cover is plastic mesh plate, on the same side as SD card holder.

    • Pry open the intake air filter cover on the bottom of the left side panel of the device.

    编辑

  2. ResMed AirSense 10 Air Intake Filter Replacement: 步骤 2 中的图像 1，2 ResMed AirSense 10 Air Intake Filter Replacement: 步骤 2 中的图像 2，2

    • Remove the used air filter and inspect for damages or blockages.

    • Replace the air filter as needed.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

2条评论

The filter has a smooth side and a fuzzy side. Which side goes against the cover? Or doesn't it matter? Thanks.

Barbara Pollack - 回复

I’m wondering the same……

Just looked it up, fuzzy side should face outward.

Joanie K - 回复

添加评论

浏览统计数据:

过去 24 小时： 8

过去 7 天： 54

过去 30 天： 206

总计 4,339