跳转到主内容

修复你的物品

维修的权力

配件 & 工具

简介

This is an easy guide to replacing the rear buttons on the Sanyo VPC-X1200.

  1. Remove the five case screws with a Phillips #00 Screwdriver. Five 3.5mm Phillips Screws Five 3.5mm Phillips Screws
    • Remove the five case screws with a Phillips #00 Screwdriver.

    • Five 3.5mm Phillips Screws

  2. 任天堂 Switch 套装

    A quick fix to get back in the game

    Shop Switch Kits

    任天堂 Switch 套装

    A quick fix to get back in the game

    Shop Switch Kits
  3. Gently lift up the back cover and set aside.
    • Gently lift up the back cover and set aside.

  4. Use small plastic pry tool to gently remove rear button plate.
    • Use small plastic pry tool to gently remove rear button plate.

    • A heat gun may be used to soften the glue for easier removal.

结论

To reassemble your device, follow these instructions in reverse order.

Anthony Giardina

于2010年04月19日注册

20 信誉积分

创作了7篇指南

团队

Cal Poly, Team 7-10, Maness Spring 2010 Cal Poly, Team 7-10, Maness Spring 2010 的会员

CPSU-MANESS-S10S7G10

4 名成员

创作了7篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 1,334