简介

Step-by-step guide to replacing your phone's logic board.

配件

无需配件。

Flip phone to see back cover.
  • Flip phone to see back cover.

  • Using either finger or spugder tool press button located near the top of phone by the antenna.

添加评论

Pry up back plate from phone to reveal battery.
  • Pry up back plate from phone to reveal battery.

  • Push button near bottom of battery using either your finger of the spudger. This will release the battery.

添加评论

  • Using a T6 Torx Screwdriver remove the four torxs on the back of the phone.

添加评论

  • Simultaneously press indicated buttons on both sides of phone.

添加评论

  • Separate back plate from the rest of phone.

  • Make sure to not pull, there is a wire (circled on image) connecting the two plates.

添加评论

  • Gently lift logic board from back plate.

添加评论

  • Place logic board on front cover.

  • Unsnap orange wire that connects the logic board to keypad sensor to allow the logic board to move freely.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Elizabeth OBrien

于2010年04月26日注册

31 信誉积分

创作了7篇指南

团队

Cal Poly, Team 30-40, Garner Spring 2010 Cal Poly, Team 30-40, Garner Spring 2010 的会员

CPSU-GARNER-S10S30G40

4 名成员

创作了14篇指南

Quero comprar esse aparelho, alguém tem para vender?

Karison Mesquita - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 3

总计 1,937