跳转到主内容
  1. remove the feet with a spudger remove the feet with a spudger
    • remove the feet with a spudger

  2. Remove the 11 screw with a PH0 screwdriver. The screws are identical
    • Remove the 11 screw with a PH0 screwdriver.

    • The screws are identical

  3. Insert a spudger between the bottom cover and the keyboard module, then go around the whole cover to uncip everything. Remove the bottom cover from the computer.
    • Insert a spudger between the bottom cover and the keyboard module, then go around the whole cover to uncip everything.

    • Remove the bottom cover from the computer.

  4. You now have acces to the inside of the machine.
    • You now have acces to the inside of the machine.

  5. Flex the metal retaining clips on the side of the RAM away from one another. If done correctly, the RAM will pop out of its lock. To insert a module, angle it as shown in the third picture, then insert it and push it down until it locks.
    • Flex the metal retaining clips on the side of the RAM away from one another.

    • If done correctly, the RAM will pop out of its lock.

    • To insert a module, angle it as shown in the third picture, then insert it and push it down until it locks.

结论

To reassemble your device, follow the steps in reverse order.

特别感谢这些译者︰

fr en

100%

Léo FRAYSSE正在帮助我们修复这个世界! 想要作出贡献?
开始翻译 ›

Léo FRAYSSE

于2018年09月03日注册

1,006 信誉积分

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 4

过去的30天: 25

总计 88