简介

DIY replacement of iPhone dust mesh.

Replacing a iPhone speaker dust mesh on the front of an iPhone would require disassembling the whole phone. There is an easier and much cheaper workaround for this...

  1. Left image shows iPhone with missing front dust mesh Right image shows dust meshes on bottom
    • Left image shows iPhone with missing front dust mesh

    • Right image shows dust meshes on bottom

  2. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店

    善于维修,即天赋异禀。

    与 #ImAGenius 分享您的维修故事

    我们都是天才

    与 #ImAGenius 分享您的维修故事

  3. Cut out a piece of stainless steel mesh of the tea filter using a pocket knife Trim the piece of mesh using a pair of scissors to a size of approx. 3x9 mm
    • Cut out a piece of stainless steel mesh of the tea filter using a pocket knife

    • Trim the piece of mesh using a pair of scissors to a size of approx. 3x9 mm

  4. Fold the piece of mesh longways using the plastic tip Use a pair of tweezers to insert the folded piece of mesh into the hole above the speaker
    • Fold the piece of mesh longways using the plastic tip

    • Use a pair of tweezers to insert the folded piece of mesh into the hole above the speaker

    • Put piece of mesh into place using plastic tip

    • That's it - see the result on the images

终点

27等其他人完成本指南。

aiwo

于2012年03月13日注册

2,242 信誉积分

撰写一个指南

This may work fine for most dirt, but with the original design there is also a cloth mesh behind the metal mesh that helps to keep finer particles out of the speaker.

This is definitely a much much much easier way to get some sort of protection in there at least. :)

Rene Jeddore - 回复

浏览统计数据:

过去的24小时: 0

过去的7天: 4

过去的30天: 28

总计 49,396