跳转到主内容

简介

The cable of the cyclometer mount can be ripped off quiet easily right before it disappears in the case. This guide explains how to fix a ripped of cable.

配件

没有特定配件。

  1. Use your cutter knife to pry open the small cap that hides the inner contacts. You probably have to go a bit deeper into the plastic as the cap is glued to the casing. You probably have to go a bit deeper into the plastic as the cap is glued to the casing.
    • Use your cutter knife to pry open the small cap that hides the inner contacts.

    • You probably have to go a bit deeper into the plastic as the cap is glued to the casing.

  2. Take the remaining cable and remove some of the thick black insulation as well as some of the thin insulation as shown in the picture. Remove the broken cable by ripping it off carefully or using a soldering iron. Remove the broken cable by ripping it off carefully or using a soldering iron.
    • Take the remaining cable and remove some of the thick black insulation as well as some of the thin insulation as shown in the picture.

    • Remove the broken cable by ripping it off carefully or using a soldering iron.

  3. Macbook 电池维修套装

    起价 $69.99

    Buy Now

    Macbook 电池维修套装

    起价 $69.99

    Buy Now
  4. Use the paper clip to hold the cable at the right position. Solder the prepared cable to the contacts.
    • Use the paper clip to hold the cable at the right position.

    • Solder the prepared cable to the contacts.

    • Remember: the red cable left, the black cable right.

    • The contacts take up heat of the soldering iron really fast. This can lead to the contacts melting the surrounding plastic. Hence, you have to be fast.

  5. Apply some glue to the mount and re-attach the cap to the mount.
    • Apply some glue to the mount and re-attach the cap to the mount.

结论

Now go and attach the cyclometer to your bike and check that it works again.

2等其他人完成本指南。

Baschtl

于2012年12月02日注册

761 信誉积分

创作了3篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 3

过去的30天: 9

总计 331