步骤 1
这个步骤还没有翻译 帮忙翻译一下




• With the front display of the device facing you, rotate the device 90 degrees counter clockwise.
• Remove the screw that is on the right side of the panel facing you.
• Now rotate the device 180 degrees and remove the second screw.
• Remove all screws with a phillips head screwdriver.
翻译
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 2
这个步骤还没有翻译 帮忙翻译一下



• Rotate the device so that the back faces you.
• With a phillips head screwdriver, locate and remove the two screws highlighted by the red circles in image one.
翻译
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 3
这个步骤还没有翻译 帮忙翻译一下
• Before removing top cover make sure that the back of the device is facing you.
• Remove the top cover by bending out on the sides, and pulling the cover towards you while applying upward pressure.
翻译
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 4
这个步骤还没有翻译 帮忙翻译一下
• Note that the spindle you will be lubing is located underneath the white disk device highlighted in figure one
• Tilt the device on its front side until you can see underneath the white circular component mentioned in the note above.
• Locate the spindle circled in figure two and apply one or two drops of 3 in 1 lubricating oil to the spindle.
翻译
一条评论
添加一条评论
添加评论
1024
取消 发帖评论

作者

与5其他贡献者

Nathan Cheadle

于04/15/10注册

161 声望

创作了7篇指南

徽章: 10

• 
• 
• 

+ 7更多徽章

团队

Cal Poly, Team 16-5, Maness Spring 2010 Cal Poly, Team 16-5, Maness Spring 2010 的会员

CPSU-MANESS-S10S16G5

4 名成员

创作了7篇指南

嵌入本指南

选择一个尺寸并复制下面的代码，将本指南作为一个小插件嵌入到你的网站/论坛中。

预览