危险
有潜在危险
如果不正确地执行这个步骤,就可能导致受伤。请保持谨慎并注意所有警告。
危险

配件

无需配件。

Disconnect the power supply cord from the outlet.
  • Disconnect the power supply cord from the outlet.

添加评论

Remove the eight screws holding the wood-patterned cover to the microwave frame. The first four screws are located on either side of the microwave front.
  • Remove the eight screws holding the wood-patterned cover to the microwave frame.

  • The first four screws are located on either side of the microwave front.

添加评论

Remove the additional four screws securing the wood-paneled case to the microwave frame. Remove the additional four screws securing the wood-paneled case to the microwave frame.
  • Remove the additional four screws securing the wood-paneled case to the microwave frame.

添加评论

Placing your hands on either side of the case, slide the case back gently until you feel it completely separate from the microwave frame. Lift the case upward slowly until the case is free of the microwave. Lift the case upward slowly until the case is free of the microwave.
  • Placing your hands on either side of the case, slide the case back gently until you feel it completely separate from the microwave frame.

  • Lift the case upward slowly until the case is free of the microwave.

添加评论

Observe the lever mechanism found just behind the door handle, inside the microwave. The plastic lever should be above the metal lever. If the metal lever is above the plastic lever, this is why the door will not open.
  • Observe the lever mechanism found just behind the door handle, inside the microwave.

  • The plastic lever should be above the metal lever. If the metal lever is above the plastic lever, this is why the door will not open.

  • In this picture, the metal part is ABOVE the white plastic part. The white part needs to be lifted to open the door so when the door lever is pressed, the metal part rises, and the plastic part stays in place.

添加评论

Lift up on the outside lever. Push up on the white plastic piece. Push metal bar down, snapping the white plastic piece above it.
  • Lift up on the outside lever.

  • Push up on the white plastic piece.

  • Push metal bar down, snapping the white plastic piece above it.

添加评论

This is how the fixed mechanism should look. Press the button and enjoy your newly fixed door!
  • This is how the fixed mechanism should look.

  • Press the button and enjoy your newly fixed door!

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Samuel

于2012年09月26日注册

100 信誉积分

创作了2篇指南

团队

Cal Poly, Team 2-12, Propen Fall 2012 Cal Poly, Team 2-12, Propen Fall 2012 的会员

CPSU-PROPEN-F12S2G12

3 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 5

过去的30天: 5

总计 1,167