跳转到主内容

简介

Use this guide to repair a broken scroll wheel. Be advised, the longevity of your repaired mouse will depend on the strength of the glue or epoxy used in the repair.

  1. Slide the tab on the bottom of the mouse to release the top panel. Slide the tab on the bottom of the mouse to release the top panel.
    • Slide the tab on the bottom of the mouse to release the top panel.

  2. Remove the top panel from the mouse. Remove the top panel from the mouse.
    • Remove the top panel from the mouse.

  3. Remove four 7mm Phillips #1 screws.
    • Remove four 7mm Phillips #1 screws.

  4. PC 笔记本电池

    所有顶级PC品牌的电池均以我们的质量保证为后盾。

    现在开始购物

    PC 笔记本电池

    所有顶级PC品牌的电池均以我们的质量保证为后盾。

    现在开始购物
  5. Use a spudger to pry the upper shell from the mouse at the cord entrance. Move slowly. The upper case is connected to the mouse with delicate wires. Move slowly. The upper case is connected to the mouse with delicate wires.
    • Use a spudger to pry the upper shell from the mouse at the cord entrance.

    • Move slowly. The upper case is connected to the mouse with delicate wires.

  6. Lift the scroll wheel out of the mouse. Lift the scroll wheel out of the mouse.
    • Lift the scroll wheel out of the mouse.

  7. Wiggle the USB cord free of the mouse.
    • Wiggle the USB cord free of the mouse.

    • Resist the temptation to yank the cord free. The wires are very delicate and soldered connections are weak

  8. Remove one 3mm Phillips #1 screw.
    • Remove one 3mm Phillips #1 screw.

    • The quantity and location of screws holding the board to the mouse depends on the manufacture date of this mouse. All screws should be easy to find.

  9. Push the broken axle piece out of the socket. Push the broken axle piece out of the socket. Push the broken axle piece out of the socket.
    • Push the broken axle piece out of the socket.

  10. Glue broken axle piece back onto the scroll wheel. This repair will last only as long as your glue or epoxy holds. The axle will re-break with weak glue and heavy use. My axle survived several heavy use days, just long enough for Monoprice to send me a new mouse.
    • Glue broken axle piece back onto the scroll wheel.

    • This repair will last only as long as your glue or epoxy holds. The axle will re-break with weak glue and heavy use. My axle survived several heavy use days, just long enough for Monoprice to send me a new mouse.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Jeff Snyder

于2013年02月07日注册

4,333 信誉积分

创作了4篇指南

团队

iFixit iFixit 的会员

Community

99 名成员

创作了9,255篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 14

总计 529