跳转到主内容

简介

Canon "E-18 error" happens when the lens gets stuck in the extended position. The LCD will display a little E-18 in the lower-left corner and start beeping.

配件

没有特定配件。

  1. Place camera lens facing upwards on the table.
    • Place camera lens facing upwards on the table.

    • Press and hold down the power button.

    • Simultaneously press down the shutter button.

  2. Replace the batteries in the camera.
    • Replace the batteries in the camera.

    • To open the battery cover slide the black lever on the underside of the camera and pull the cover toward the front.

    • Remove the old batteries from the camera and wait a few moments.

    • Put in a fresh set of batteries.

    • Close battery slide and power camera back on.

  3. Put blow dryer in the "no heat" setting prior to plugging it in.
    • Put blow dryer in the "no heat" setting prior to plugging it in.

    • Plug in and turn the blow dryer on.

    • Blow air in the gaps between the lens.

结论

In conclusion, using this guide to fix the E-18 on the lens of the Canon PowerShot A80,will allow the camera to capture photos once again. To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Tim

于2011年01月06日注册

157 信誉积分

撰写一个指南

团队

Cal Poly, Team 7-31, Regan Winter 2011 Cal Poly, Team 7-31, Regan Winter 2011 的会员

CPSU-REGAN-W11S7G31

6 名成员

创作了12篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 21

总计 3,909