Removing the Solenoid Replacement - iFixit 维修指南

本指南有最近更改，您可查看未经巡查的最新版本。

你所需要的

步骤 1 Removing the Solenoid from the Body

Removing the Solenoid Replacement, Removing the Solenoid from the Body: 步骤 1 中的图像 1，1

Gently use tweezers to detach the white vision wire harness, located directly under the feed tube.
Another small tool or your fingers will work for this.

步骤 2

Removing the Solenoid Replacement: 步骤 2 中的图像 1，1

Remove the two 1-1/4" screws on either side of the circuit board using a 3/32" allen wrench.

步骤 3

Removing the Solenoid Replacement: 步骤 3 中的图像 1，1

Separate the solenoid from the gun's body by gently pulling it upwards.

步骤 4

Removing the Solenoid Replacement: 步骤 4 中的图像 1，1

Slide the metal body out of the plastic shell by holding one in each hand and gently pulling apart.

结论

To reassemble your device, follow these instructions in reverse order.

作者

与5其他贡献者

Shane Villalpando

于02/02/15注册

1,031 声望

创作了10篇指南

+ 7更多徽章

团队

Cal Poly, Team 8-42, Amido Winter 2015 Cal Poly, Team 8-42, Amido Winter 2015 的会员

CPSU-AMIDO-W15S8G42

4 名成员

创作了10篇指南

0条评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 54