跳转到主内容

Removing the Jura IMPRESSA J5 brewing unit (brewgroup)

你所需要的

  1. Removing the Jura IMPRESSA J5 brewing unit (brewgroup), Jura Capresso IMPRESSA J5  opening procedure: 步骤 1 中的图像 1,1
    • Unplug the power cord!

    • Remove the water tank and the drip tray. Remove all coffee beans from the storage container.

  2. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 步骤 2 中的图像 1,3 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 步骤 2 中的图像 2,3 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 步骤 2 中的图像 3,3
    • Flip open the lid of the bean compartment.

    • Unscrew the two slotted screws inside the bean compartment. The screws have a rubber washer and will not come out completely.

    • Remove the bean compartment.

  3. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 步骤 3 中的图像 1,3 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 步骤 3 中的图像 2,3 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 步骤 3 中的图像 3,3
    在这个步骤中使用的工具:
    iFixit Precision 4 mm Screwdriver Bit
    $2.99
    购买
    • The top cover is fastened with oval head screws. Unscrew them.

    • These screws have an oval head that makes them look like rivets (picture 2). You need to use a special bit - also available at iFixit - for their removal. Here a DIY guide. If the right bit is not available, it could be done with a pair of needle nose pliers. Jura wants to keep us out of our own machines!!!

  4. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 步骤 4 中的图像 1,1
    • Also remove the two oval head screws underneath the ground coffee compartment lid.

  5. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 步骤 5 中的图像 1,1
    • Now you can pry up the top cover all around.

    • Remove the top cover. This often requires a little force.

    • Use plastic tools to avoid scratching your device.

  6. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 步骤 6 中的图像 1,2 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 步骤 6 中的图像 2,2
    • Turn the device with the back facing you.

    • Turn the Jura label a few degrees counterclockwise. If it's hard to do, use a small suction cup.

    • Remove the Jura label.

  7. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 步骤 7 中的图像 1,3 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 步骤 7 中的图像 2,3 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 步骤 7 中的图像 3,3
    • Underneath the label you will find two Torx T15 screws. Remove them.

    • Carefully pull the top of the chrome cover slightly outwards, then push it down and put it aside.

  8. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 步骤 8 中的图像 1,1
    • Remove the Torx T15 screw on the side panel with the water tank.

  9. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 步骤 9 中的图像 1,2 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 步骤 9 中的图像 2,2
    • Pull the right side panel slightly towards the back.

    • Remove the side panel.

  10. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 步骤 10 中的图像 1,1
    • Pull the left side panel slightly towards the back and remove it.

  11. Removing the Jura IMPRESSA J5 brewing unit (brewgroup), Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 步骤 11 中的图像 1,2 Removing the Jura IMPRESSA J5 brewing unit (brewgroup), Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 步骤 11 中的图像 2,2
    • The brewing unit is on the left side of the machine.

  12. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 步骤 12 中的图像 1,2 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 步骤 12 中的图像 2,2
    • The cover over the brewing unit is only lightly gripped. Lift it out.

  13. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 步骤 13 中的图像 1,1
    • In this image the brewing unit has been removed already to show you how it is connected.

    • Two Torx T15 machine screws

    • One Torx T15 screw

    • The hot water connection is plugged in.

    • The hose for the coffee spout is connected above.

  14. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 步骤 14 中的图像 1,1
    • Unscrew the two Torx T15 machine screws.

    • Unscrew the lower Torx T15 screw near the hot water inlet pipe.

    • Pull off the coffee dispensing pipe.

  15. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 步骤 15 中的图像 1,1
    • First pull the brewing unit outward slightly at the base, lift it out with a downward motion.

    • If you want to disassemble the brewing unit for maintenance or cleaning, use these oder these instructions.

结论

Work your way through the instructions in reverse to re-assemble the device.

另外一个人完成了本指南。

由衷感谢以下译者:

de en

100%

这些译者帮助我们修补全世界! 您也想加入吗?
开始翻译 ›

VauWeh

于10/19/15注册

199,709 声望

创作了246篇指南

团队

Repair is War on Entropy Repair is War on Entropy 的会员

Community

24 名成员

创作了1,084篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 4

过去 7 天: 25

过去 30 天: 58

总计 4,608