修复你的物品 社区 商店

Removing the HP Elitebook 6930p Switch Cover

简介

This guide will show you how to remove the switch cover assembly from the laptop.

你所需要的

  1. Removing the HP Elitebook 6930p Switch Cover, Battery Removal: 步骤 1 中的图像 1，3 Removing the HP Elitebook 6930p Switch Cover, Battery Removal: 步骤 1 中的图像 2，3 Removing the HP Elitebook 6930p Switch Cover, Battery Removal: 步骤 1 中的图像 3，3

    • Flip laptop over and locate the battery release button

    • Push release button to the left to release battery and gently pull battery from the laptop

    编辑

  2. Removing the HP Elitebook 6930p Switch Cover, Keyboard: 步骤 2 中的图像 1，3 Removing the HP Elitebook 6930p Switch Cover, Keyboard: 步骤 2 中的图像 2，3 Removing the HP Elitebook 6930p Switch Cover, Keyboard: 步骤 2 中的图像 3，3

    • Loosen the three Phillips 2.5×9.0 captive screws that secure the keyboard to the laptop

    • Turn the laptop so the keyboard is facing up and locate the 4 retention tabs along the back edge of the keyboard

    • Slide the retention clips toward the keyboard to release the keyboard

    编辑

  4. Removing the HP Elitebook 6930p Switch Cover: 步骤 3 中的图像 1，3 Removing the HP Elitebook 6930p Switch Cover: 步骤 3 中的图像 2，3 Removing the HP Elitebook 6930p Switch Cover: 步骤 3 中的图像 3，3

    • Use a plastic pry tool to lift the rear edge of the keyboard.

    • Pull the keyboard slightly towards the display to disengage the tabs along the front of the keyboard from the laptop palm rest.

    • Lift the keyboard up to reveal the ribbon connectors

    编辑

  5. Removing the HP Elitebook 6930p Switch Cover: 步骤 4 中的图像 1，3 Removing the HP Elitebook 6930p Switch Cover: 步骤 4 中的图像 2，3 Removing the HP Elitebook 6930p Switch Cover: 步骤 4 中的图像 3，3

    • Release the larger ribbon cable by flipping the brown retainer up so it is parallel with the ribbon cable

    • Release the smaller ribbon cable by lifting up the white retainer

    • I found it easier to reinstall both cables with the new keyboard resting on the back edge

    编辑

  6. Removing the HP Elitebook 6930p Switch Cover, Switch Cover: 步骤 5 中的图像 1，3 Removing the HP Elitebook 6930p Switch Cover, Switch Cover: 步骤 5 中的图像 2，3 Removing the HP Elitebook 6930p Switch Cover, Switch Cover: 步骤 5 中的图像 3，3

    • Remove the two M2.0×4.0 broad-head screws.

    • Remove the three Torx T8 M2.5×7.0 screws.

    编辑

  7. Removing the HP Elitebook 6930p Switch Cover: 步骤 6 中的图像 1，3 Removing the HP Elitebook 6930p Switch Cover: 步骤 6 中的图像 2，3 Removing the HP Elitebook 6930p Switch Cover: 步骤 6 中的图像 3，3

    • Turn the computer over with the front toward you and the open the computer as far as possible.

    • Release the ZIF connector for the power button board cable.

    • Remove the switch cover by lifting it straight up and flip it forward.

    • Release the ZIF connector for the LED board cable.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

作者

与1其他贡献者

Richdave

于04/09/10注册

32,063 声望

创作了30篇指南

徽章: 51

+ 48更多徽章

团队

Master Techs Master Techs 的会员

Community

322 名成员

创作了2,528篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 5

总计 1,946