简介

This guide will explain how to remove the display hinge. The tools required for this section are the spudger and the PH 2 screwdriver.

配件

无需配件。

  1. Before starting, make sure the display is UNPLUGGED.  Failure to do so can result in shock and serious injury.
    • Before starting, make sure the display is UNPLUGGED. Failure to do so can result in shock and serious injury.

    • Flip the Cinema Display so it is on its face and the feet are pointed away from you.

    • Using the PH 2 screwdriver, unscrew the three feet screws (9.52 x 4.43 mm).

    • Remove the back foot from the hinge mount by gently pulling it upwards.

    添加评论

  2. Remove the back plate screws (5.25 x 4.43 mm) using the PH 2 screw driver.
    • Remove the back plate screws (5.25 x 4.43 mm) using the PH 2 screw driver.

    • Lift the back plate off of the display.

    • Completely remove the back plate and set it aside.

    添加评论

    • Remove the Apple Display Connector plate screws (9.52 x 3.43 mm) with the PH 2 screwdriver.

    • Once the two screws have been removed, move the cord out of the way.

    添加评论

    • Remove the hinge plate screws (5.52 x 3.43 mm) with the PH 2 screw driver.

    • Then lift out the hinge mount.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

Thomas Harper

于2011年04月01日注册

227 信誉积分

撰写一个指南

团队

Cal Poly, Team 10-41, Forte Spring 2011 Cal Poly, Team 10-41, Forte Spring 2011 的会员

CPSU-FORTE-S11S10G41

5 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 6

过去的30天: 12

总计 6,061