修复你的物品 社区 商店

Removing a stuck Sterwins trimmer head

简介

Oops... I forgot to put the "loosening" washer on my Sterwins trimmer!

How do I do it?

你所需要的

  1. Removing a stuck Sterwins trimmer head, Work safely!: 步骤 1 中的图像 1，1

    • Place the bottom of your unit on a flat surface to work safely.

    • Wear gloves!

    翻译

  2. Removing a stuck Sterwins trimmer head, Removing the axle from the cutting head.: 步骤 2 中的图像 1，1

    • Remove the two Torx T30 screws.

    • Note the screw locations.

    翻译

  4. Removing a stuck Sterwins trimmer head, Removing the lower tube: 步骤 3 中的图像 1，1

    • You can now disconnect the lower tube from the cutting head.

    翻译

    • Clamp the axle in a vise.

    • Rotate the head so that the head and cutting assembly can be disassembled.

    • Careful, it's an inverted step! "But, Corentin, why is it an inverted step?" It's to prevent untimely and dangerous loosening!

    翻译

  6. Removing a stuck Sterwins trimmer head, Reposition the loosening washer: 步骤 5 中的图像 1，2 Removing a stuck Sterwins trimmer head, Reposition the loosening washer: 步骤 5 中的图像 2，2

    • Now that you've saved your device, don't forget to put the washer back on!

    • Tighten the two Torx T30 screws to secure the bottom section and the tube.

    翻译
结论

Finally, add the "loosening" washer to avoid anything getting stuck again.

3等其他人完成本指南。

由衷感谢以下译者：

fr en

100%

shingle

Angel

这些译者帮助我们修补全世界！ 您也想加入吗？
开始翻译 ›

0条评论

添加评论

浏览统计数据:

过去 24 小时： 33

过去 7 天： 200

过去 30 天： 1,051

总计 10,181