Removing Nikon Coolpix 4600 Front and Rear case

简介

This guide will walk you through the steps to remove the front and rear casing of your Nikon Coolpix 4600 camera. This repair might be needed if the front or rear casing of your Nikon Coolpix 4600 is cracked, damaged, or malfunctioning due to drops, impacts, or general wear and tear. Removing and replacing the casings will resolve issues such as physical damage, malfunctioning buttons, or difficulty accessing internal components for further repairs. The repair requires careful handling and basic tools like screwdrivers and tweezers. One important consideration is that removing the casing involves working with small screws and connectors, so it's essential to keep track of all parts to ensure proper reassembly. Additionally, since the casing holds together critical parts of the camera, extra caution should be taken to avoid damaging internal components like the screen, lens, or motherboard.

你所需要的

步骤 1 Front and Rear Case

Removing Nikon Coolpix 4600 Front and Rear case, Front and Rear Case: 步骤 1 中的图像 1，2

Removing Nikon Coolpix 4600 Front and Rear case, Front and Rear Case: 步骤 1 中的图像 2，2

Find the six screws on the exterior of the camera: two 3.3 mm screws on the bottom and two 5.25 mm screws on both the left and right sides.
Using a Phillips 00 screwdriver, remove all of the six screws.

编辑

步骤 2

Gently separate the front and back casing by pulling them apart with your hands, being careful not to damage any internal components.
The front case is attached to internal components and cannot be removed independently.

编辑

步骤 3

Examine the connection between the ribbon cable and the motherboard closely. Identify the two grey tabs on each side of the connecting bracket.
Slide the grey tabs toward the bottom of the camera to release the ribbon cable. Gently disconnect the ribbon cable from the motherboard.
Once the ribbon cable is disconnected, you can now carefully separate the back case from the front case.