简介

This guide will show you how to remove the CPU Cooler on your HP Compaq dx2000MT.

Turn off your computer and remove the power cable by pulling it straight out of its socket.
  • Turn off your computer and remove the power cable by pulling it straight out of its socket.

添加评论

Remove the 2 Phillips #2 screws that secure the case door to the device.
  • Remove the 2 Phillips #2 screws that secure the case door to the device.

添加评论

  • Remove the side case door by pushing towards the rear of the device with your hand.

    • This may take considerable force so keep pushing!

  • Once you slide the door back, remove it by pulling it outwards from the device.

添加评论

  • Remove the side case door by pushing towards the rear of the device with your hand.

    • Once again, this may take considerable force.

  • Once you slide the door back, remove it by pulling it outwards from the device.

it’s useless my friends

bisous sur les fesses de ta mamaa

Albert einstein - 回复

  • Remove the 3 pin power connector by pulling it towards the side of the device.

添加评论

  • Unscrew the 4 Torx T15 screws holding the CPU Cooler in place.

  • Make sure to hold your cpu cooler when removing the screws. You don't want it to fall!

添加评论

  • Remove the cpu cooler by pulling out towards the side of the device.

  • Make sure you do not touch where the cpu cooler makes contact with the processor! You could contaminate the layer of thermal paste that separates these components.

  • When replacing your cpu cooler, make sure you clean the processor contact area on the cooler and processor with isopropyl rubbing alcohol.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Logan Pace

于2011年10月12日注册

2,020 信誉积分

创作了9篇指南

团队

Cal Poly, Team 17-16, Regan Fall 2011 Cal Poly, Team 17-16, Regan Fall 2011 的会员

CPSU-REGAN-F11S17G16

4 名成员

创作了17篇指南

添加评论

浏览统计数据:

过去的24小时: 3

过去的7天: 6

过去的30天: 42

总计 3,852