简介

This guide will show how to remove the back cover.

Remove the six external screws from the camera using a Phillips #0 screwdriver.
  • Remove the six external screws from the camera using a Phillips #0 screwdriver.

  • After the screws has been removed, the bottom of the back half of the external case should be loosened from the camera.

  • Be careful, make sure you don't lose the screws.

添加评论

Open the battery cover that's located on the bottom right side of the camera and carefully remove the battery.
  • Open the battery cover that's located on the bottom right side of the camera and carefully remove the battery.

添加评论

  • Slide your fingernail or a plastic spudger in the groove from the bottom to the top right side of the camera.

添加评论

  • Carefully squeeze the top right corner of the camera and pry off the external cover.

  • If you hear a "cracking" sound. This is normal.

  • Continue to pull the external cover and it will come off cleanly.

  • Be cautious of the flash capacitor. It carries an electrical charge, that may give you an unpleasant shock.

添加评论

  • Carefully pull off the back cover, parts behind the back of the case might fall out.

添加评论

终点

2等其他人完成本指南。

Hasit

于2010年04月15日注册

168 信誉积分

创作了2篇指南

团队

Cal Poly, Team 6-17, Maness Spring 2010 Cal Poly, Team 6-17, Maness Spring 2010 的会员

CPSU-MANESS-S10S6G17

4 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 3

总计 3,305