跳转到主内容

简介

This installation guide will help you with the following:

  • removing foam disk
  • decreasing the bass

配件

没有特定配件。

  1. Remove the ear pads by peeling them away from the grill.
    • Remove the ear pads by peeling them away from the grill.

  2. Remove all four 1cm screws on the inside of the headphone using a #1 Phillips head.
    • Remove all four 1cm screws on the inside of the headphone using a #1 Phillips head.

  3. Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物

    Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物
  4. Remove the speaker from the grill by pulling it out.
    • Remove the speaker from the grill by pulling it out.

    • Remove the speaker carefully so you do not rip the wires out.

  5. Remove the foam disk from the grill by peeling it away from the grill. During reassembly, make sure that the speaker is angled into your ear canal.
    • Remove the foam disk from the grill by peeling it away from the grill.

    • During reassembly, make sure that the speaker is angled into your ear canal.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Melanie Reis

于2013年01月11日注册

122 信誉积分

创作了5篇指南

团队

Cal Poly, Team 17-19, Forte Winter 2013 Cal Poly, Team 17-19, Forte Winter 2013 的会员

CPSU-FORTE-W13S17G19

6 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 2

过去的30天: 15

总计 1,374