跳转到主内容

简介

To access the internal components of the guitar and diagnose problems, you must remove the rear case. This guide will demonstrate how to remove the rear case properly.

配件

没有特定配件。

  1. RedOctane X-Plorer Rear Case Replacement, Rear Case: 步骤 1 中的图像 1,2 RedOctane X-Plorer Rear Case Replacement, Rear Case: 步骤 1 中的图像 2,2
    • Remove the strap by pulling it off of the mounts located on the body and neck.

  2. RedOctane X-Plorer Rear Case Replacement: 步骤 2 中的图像 1,3 RedOctane X-Plorer Rear Case Replacement: 步骤 2 中的图像 2,3 RedOctane X-Plorer Rear Case Replacement: 步骤 2 中的图像 3,3
    • Remove the nine 12mm Phillips #1 screws around the perimeter of the case with a screwdriver.

    • Remove the two 15mm Phillips #1 screws connecting the body panel to the neck panel with a screwdriver.

    • These screws can also be Torx on some models.

    • Pull off the rear case.

  3. RedOctane X-Plorer Rear Case Replacement: 步骤 3 中的图像 1,3 RedOctane X-Plorer Rear Case Replacement: 步骤 3 中的图像 2,3 RedOctane X-Plorer Rear Case Replacement: 步骤 3 中的图像 3,3
    • Remove the five 12mm Phillips #1 screws along the neck with a screwdriver.

    • Pull off the top shell of the neck to expose the internal features.

结论

To reassemble your device, follow these instructions in reverse order.

Riley

于2018年04月18日注册

649 声望

创作了7篇指南

团队

Cal Poly, Team S17-G1, Livingston Spring 2018 Cal Poly, Team S17-G1, Livingston Spring 2018 的会员

CPSU-LIVINGSTON-S18S17G1

3 名成员

创作了9篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 1

过去 7 天: 4

过去 30 天: 10

总计 400