简介

This guide will show how to reconnect the foot support to the wheelchair after it has fallen off.

工具

配件

无需配件。

  1. Slide the footrest sockets down as shown and use a 10 mm wrench to tighten the bolts at the desired height. Slide the footrest sockets down as shown and use a 10 mm wrench to tighten the bolts at the desired height. Slide the footrest sockets down as shown and use a 10 mm wrench to tighten the bolts at the desired height.
    • Slide the footrest sockets down as shown and use a 10 mm wrench to tighten the bolts at the desired height.

  2. 所有超过US$100或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  3. Screw in the bolt to the top socket to secure the height of the footrest.
    • Screw in the bolt to the top socket to secure the height of the footrest.

  4. Screw in the bolt attaching the footrest to the frame. Screw in the lower bolt to the footrest.
    • Screw in the bolt attaching the footrest to the frame.

    • Screw in the lower bolt to the footrest.

结论

Check that the footrest is at the desired height. If the footrest is still uncomfortable start the guide over again from step 1 using a different height to tighten bolts.

Kali Slaughter

于2013年04月19日注册

207 信誉积分

创作了5篇指南

团队

Cal Poly, Team 14-8, Maness Spring 2013 Cal Poly, Team 14-8, Maness Spring 2013 的会员

CPSU-MANESS-S13S14G8

5 名成员

创作了7篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 5

总计 528