修复你的物品 社区 商店

Realigning 12-Inch Bionaire Fan Metal Coil

简介

Annoyed by the fact that your fan won't stay in a desired, fixed position? This fast fix guide will help correct that problem in no time!

你所需要的

  1. Realigning 12-Inch Bionaire Fan Metal Coil, Realigning 12-Inch Bionaire Fan Metal Coil: 步骤 1 中的图像 1，2 Realigning 12-Inch Bionaire Fan Metal Coil, Realigning 12-Inch Bionaire Fan Metal Coil: 步骤 1 中的图像 2，2

    • Unlock all of the tabs holding the fan cage together.

    • Carefully pull off the cage.

    编辑

  2. Realigning 12-Inch Bionaire Fan Metal Coil: 步骤 2 中的图像 1，2 Realigning 12-Inch Bionaire Fan Metal Coil: 步骤 2 中的图像 2，2

    • Using a Phillips #2 screwdriver, untighten the 1/4'' screw that is located underneath the fan blade.

    • Blade may be sharp so watch out!

    • Cautiously remove the blade from the hinge.

    • Put the screws in a cup so you don't lose them!

    编辑

  3. Realigning 12-Inch Bionaire Fan Metal Coil: 步骤 3 中的图像 1，2 Realigning 12-Inch Bionaire Fan Metal Coil: 步骤 3 中的图像 2，2

    • Rotate the black cap counter-clockwise to disconnect it from the back fan cage.

    • Pull off the back cage from the engine holder.

    编辑

  5. Realigning 12-Inch Bionaire Fan Metal Coil: 步骤 4 中的图像 1，1

    • Working with the Phillips #2 screwdriver, loosen the 1/4'' center hinge screw from the metal base.

    编辑

  6. Realigning 12-Inch Bionaire Fan Metal Coil: 步骤 5 中的图像 1，2 Realigning 12-Inch Bionaire Fan Metal Coil: 步骤 5 中的图像 2，2

    • Using the Phillips #2 screwdriver, separate the wire holder from the back of black cover by removing the two 1/8'' screws.

    编辑

  7. Realigning 12-Inch Bionaire Fan Metal Coil: 步骤 6 中的图像 1，2 Realigning 12-Inch Bionaire Fan Metal Coil: 步骤 6 中的图像 2，2

    • Pull of the black knob by rotating the knob counter-clockwise.

    • Pull down the black cover all the way.

    • The coil may pop out after removing the cover.

    编辑

  8. Realigning 12-Inch Bionaire Fan Metal Coil: 步骤 7 中的图像 1，2 Realigning 12-Inch Bionaire Fan Metal Coil: 步骤 7 中的图像 2，2

    • Take out the gold metal spring.

    • Realign the metal coil into designated space.

    • Push the coil in with some force so it rests perfectly in the space.

    • To make placing the coil back in more easier, use the screwdriver!

    编辑

  9. Realigning 12-Inch Bionaire Fan Metal Coil: 步骤 8 中的图像 1，2 Realigning 12-Inch Bionaire Fan Metal Coil: 步骤 8 中的图像 2，2

    • Align the end of the metal coil into the same hole the black wire comes out of in the black cover from step 6.

    • This can be a frustrating step. Be patient!

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

作者

与2其他贡献者

Hemish Patel

于09/29/15注册

231 声望

撰写一个指南

徽章: 5

+ 2更多徽章

团队

Cal Poly, Team 10-3, Green Fall 2015 Cal Poly, Team 10-3, Green Fall 2015 的会员

CPSU-GREEN-F15S10G3

4 名成员

创作了4篇指南

一条评论

I have a fan It hum I have to spin the blade for it to start spin

Chris - 回复

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 10

过去 30 天： 14

总计 3,768