简介

Many times, the speaker or the camera in this model of the Sony Ericsson cease to function. This is a guide that will show you how to reach these so that you can replace them quickly and without needing to send it in.

Flick the two lock tabs into the unlocked positions by pushing each button forward.
  • Flick the two lock tabs into the unlocked positions by pushing each button forward.

添加评论

Pop the back cover up using the groove on the top of the phone.
  • Pop the back cover up using the groove on the top of the phone.

添加评论

You can now access the phone's battery.
  • You can now access the phone's battery.

  • Using a spudger, remove the battery and set it aside.

添加评论

Mac RAM 套件
加速你的Mac。充分利用它的内存。
Mac RAM 套件
从Mac中清理出更多内存。
Two rubber buttons cover the bottom two screws. Remove these rubber coverings to access the phone screws. Using a T6 torx wrench, remove the four small screws at the top and bottom corners  on the backside of the phone.
  • Two rubber buttons cover the bottom two screws. Remove these rubber coverings to access the phone screws.

  • Using a T6 torx wrench, remove the four small screws at the top and bottom corners on the backside of the phone.

添加评论

Carefully pry off the faceplate using a spudger. Insert the spudger into the middle of the phone.
  • Carefully pry off the faceplate using a spudger. Insert the spudger into the middle of the phone.

  • Start near a button and carefully work your way around the phone until the faceplate pops off.

添加评论

Remove the plastic and metal buttons located around the seam and place off to the side.
  • Remove the plastic and metal buttons located around the seam and place off to the side.

  • Be careful not to lose them!

添加评论

With a tweezer, pry off the back metal plate.
  • With a tweezer, pry off the back metal plate.

添加评论

The speaker and camera combo is accessible after the removal of two small #00 screws. Use the #00 Philips Screwdriver for this step. The piece is now free to move from the phone core.
  • The speaker and camera combo is accessible after the removal of two small #00 screws. Use the #00 Philips Screwdriver for this step.

  • The piece is now free to move from the phone core.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Bob

于2013年04月15日注册

301 信誉积分

创作了6篇指南

团队

SUNY Cortland, Team 1-3, Getto Spring 2013 SUNY Cortland, Team 1-3, Getto Spring 2013 的会员

SUNYCORT-GETTO-S13S1G3

3 名成员

创作了8篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 10

总计 573