简介

Do your hands hurt or slip when riding your scooter? Chances are your handle grips need to be replaced. This guide will show you how.

If the scooter does not already have handle grips, skip to step 2. Locate the handle grips at the upper ends of the T-tube.
  • If the scooter does not already have handle grips, skip to step 2.

  • Locate the handle grips at the upper ends of the T-tube.

  • Be careful to keep the scissors away from your other hand while cutting the handle grips.

  • Wedge one end of a pair of scissors between the metal T-tube and a handle grip, with the cutting edge toward the handle grip. Cut the handle grip off.

  • Repeat for the other handle grip.

添加评论

Mac RAM 套件
加速你的Mac。充分利用它的内存。
Mac RAM 套件
从Mac中清理出更多内存。
Soak the replacement handle grips in warm water for 2-3 minutes. The longer you soak the handle grips in water, the larger they get. Soaking the handle grips for a long time will not damage them.
  • Soak the replacement handle grips in warm water for 2-3 minutes.

  • The longer you soak the handle grips in water, the larger they get. Soaking the handle grips for a long time will not damage them.

添加评论

Each handle grip should now slide onto the T-tube with ease. If not, soak the handle grip(s) in warm water for another 1-3 minutes. Holding the T-tube with one hand, slide a handle grip completely onto the T-tube.
  • Each handle grip should now slide onto the T-tube with ease. If not, soak the handle grip(s) in warm water for another 1-3 minutes.

  • Holding the T-tube with one hand, slide a handle grip completely onto the T-tube.

    • Repeat for the other handle grip if installing both.

  • Let the handle grips dry for 24 hours before use.

添加评论

终点

另外一个人完成了本指南。

Jordyn

于2012年10月09日注册

295 信誉积分

创作了5篇指南

团队

Cal Poly, Team 9-13, Amido Fall 2012 Cal Poly, Team 9-13, Amido Fall 2012 的会员

CPSU-AMIDO-F12S9G13

4 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 8

过去的30天: 60

总计 2,540