Razer Kraken Ultimate Speaker Replacement

简介

Should the speakers on you Razer Kraken Ultimate stop working and none of the trouble shooting solutions worked, here is a guide for replacing them. All steps for removing the ear pads must be followed before you can gain access to the speakers.

Make sure you have the replacement pieces before preforming this task, make sure you following the guides before this one correctly. this guide will help you improve your speakers on the headset.

你所需要的

步骤 1 Ear Pads

Razer Kraken Ultimate Speaker Replacement, Ear Pads: 步骤 1 中的图像 1，3

Razer Kraken Ultimate Speaker Replacement, Ear Pads: 步骤 1 中的图像 2，3

Razer Kraken Ultimate Speaker Replacement, Ear Pads: 步骤 1 中的图像 3，3

Grab the ear piece from one of the sides and lightly pull it outwards.
Ideally, do not pull the ear piece directly away from the speaker; it may damage the piece.

编辑

步骤 2

Once you have taken off one side, you can then remove the whole piece by slowly prying the pad away from the headphones.

编辑

步骤 3

Repeat steps on the other side.

编辑

步骤 4 Speaker

Razer Kraken Ultimate Speaker Replacement, Speaker: 步骤 4 中的图像 1，3

Razer Kraken Ultimate Speaker Replacement, Speaker: 步骤 4 中的图像 2，3

Razer Kraken Ultimate Speaker Replacement, Speaker: 步骤 4 中的图像 3，3

Remove the four 10 mm Phillips #00 screws securing the right speaker.
Be sure the device is unplugged before attempting to remove any of the screws.

编辑

步骤 5

Remove the 10 mm Phillips #00 screws securing the left speaker.
Note that one of the screws is hidden behind the product information sticker. Use your screw driver to punch a hole in the sticker.

编辑