修复你的物品 社区 商店

Razer DeathAdder Chroma Motherboard Replacement Guide

简介

The Razer DeathAdder Chroma may experience critical issues related to the device’s motherboard. To resolve them, it might be necessary to fix components below the motherboard.

你所需要的

  1. Razer DeathAdder Chroma Motherboard Replacement Guide, Outer Casing: 步骤 1 中的图像 1，1

    • Opening the mouse casing will void any warranty that exists for the mouse.

    • Turn the mouse over so the bottom is facing up.

    编辑

  2. Razer DeathAdder Chroma Motherboard Replacement Guide: 步骤 2 中的图像 1，2 Razer DeathAdder Chroma Motherboard Replacement Guide: 步骤 2 中的图像 2，2

    • Use the blunt end of the spudger to pry the adhesive rubber pads from the top left and right edges.

    编辑

  3. Razer DeathAdder Chroma Motherboard Replacement Guide: 步骤 3 中的图像 1，2 Razer DeathAdder Chroma Motherboard Replacement Guide: 步骤 3 中的图像 2，2

    • Use a Phillips #0 screwdriver to remove two 6.7 mm screws.

    编辑

  4. Razer DeathAdder Chroma Motherboard Replacement Guide: 步骤 4 中的图像 1，1

    • Use your fingers to identify the location of the screw under the bottom label.

    编辑

  5. Razer DeathAdder Chroma Motherboard Replacement Guide: 步骤 5 中的图像 1，1

    • Use a Phillips #0 screwdriver to remove one 6.7 mm screw.

    • Clear the label away from around the screw for easier removal.

    编辑

  7. Razer DeathAdder Chroma Motherboard Replacement Guide: 步骤 6 中的图像 1，3 Razer DeathAdder Chroma Motherboard Replacement Guide: 步骤 6 中的图像 2，3 Razer DeathAdder Chroma Motherboard Replacement Guide: 步骤 6 中的图像 3，3

    • Turn the mouse over so the bottom is facing down.

    • Separate the top casing from the bottom base by pulling the top casing upwards.

    • Separating the casing too quickly could damage the ribbon connector between the motherboard and the LED lights.

    编辑

  8. Razer DeathAdder Chroma Motherboard Replacement Guide: 步骤 7 中的图像 1，2 Razer DeathAdder Chroma Motherboard Replacement Guide: 步骤 7 中的图像 2，2

    • Disconnect the ribbon connector between the motherboard and the LED lights by pulling upward.

    • Pulling too hard could damage the wire connections.

    编辑

  9. Razer DeathAdder Chroma Motherboard Replacement Guide, Motherboard: 步骤 8 中的图像 1，2 Razer DeathAdder Chroma Motherboard Replacement Guide, Motherboard: 步骤 8 中的图像 2，2

    • Disconnect the ribbon connector between the motherboard and the USB cable by pulling upward.

    编辑

  10. Razer DeathAdder Chroma Motherboard Replacement Guide: 步骤 9 中的图像 1，1

    • Use a Phillips #0 screwdriver to remove three 5.5 mm screws.

    编辑

  11. Razer DeathAdder Chroma Motherboard Replacement Guide: 步骤 10 中的图像 1，2 Razer DeathAdder Chroma Motherboard Replacement Guide: 步骤 10 中的图像 2，2

    • Use a Phillips #0 screwdriver to remove two 11.5 mm screws on the side buttons.

    编辑

  12. Razer DeathAdder Chroma Motherboard Replacement Guide: 步骤 11 中的图像 1，1

    • Use a Phillips #000 screwdriver to remove one 5.0 mm screw.

    编辑

  13. Razer DeathAdder Chroma Motherboard Replacement Guide: 步骤 12 中的图像 1，2 Razer DeathAdder Chroma Motherboard Replacement Guide: 步骤 12 中的图像 2，2

    • Disconnect the ribbon connector between the motherboard and the optical sensor.

    编辑

  14. Razer DeathAdder Chroma Motherboard Replacement Guide: 步骤 13 中的图像 1，2 Razer DeathAdder Chroma Motherboard Replacement Guide: 步骤 13 中的图像 2，2

    • Remove the motherboard by grasping the sides and gently pulling upward.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

5等其他人完成本指南。

作者

与3其他贡献者

Nathan D. Kappler

于03/27/17注册

343 声望

创作了2篇指南

徽章: 10

+ 7更多徽章

团队

Baylor, Team S5-G2, Williams Spring 2017 Baylor, Team S5-G2, Williams Spring 2017 的会员

BU-WILLIAMS-S17S5G2

3 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 3

过去 7 天： 13

过去 30 天： 57

总计 9,884