跳转到主内容

你所需要的

  1. Razer Blade Stealth 2017 Speaker Replacement, Battery: 步骤 1 中的图像 1,2 Razer Blade Stealth 2017 Speaker Replacement, Battery: 步骤 1 中的图像 2,2
    • Before you begin, be sure to turn off your laptop and discharge the battery down to 25%.

    • Use a Torx T5 screwdriver to remove the eight, 3mm screws on the bottom cover of the laptop.

    • Whenever you remove screws from the device, remember to save and label them.

  2. Razer Blade Stealth 2017 Speaker Replacement: 步骤 2 中的图像 1,1
    • Remove the bottom cover of the laptop by sliding it away from the hinge.

    • Do not force the cover up!

  3. Razer Blade Stealth 2017 Speaker Replacement: 步骤 3 中的图像 1,2 Razer Blade Stealth 2017 Speaker Replacement: 步骤 3 中的图像 2,2
    • Use your fingernail to pry up and disconnect the battery from the motherboard.

  4. Razer Blade Stealth 2017 Speaker Replacement: 步骤 4 中的图像 1,1
    • Use a Phillips #00 screwdriver to remove the six, 5mm screws securing the battery.

  5. Razer Blade Stealth 2017 Speaker Replacement: 步骤 5 中的图像 1,2 Razer Blade Stealth 2017 Speaker Replacement: 步骤 5 中的图像 2,2
    • Remove any tape attached to the battery.

    • Use the plastic spudger to pry out the battery.

  6. Razer Blade Stealth 2017 Speaker Replacement, Speaker: 步骤 6 中的图像 1,2 Razer Blade Stealth 2017 Speaker Replacement, Speaker: 步骤 6 中的图像 2,2
    • Use tweezers to disconnect the red and black speaker cables by lifting up on the pin-header.

    • The same process is used for both speaker connections.

    • Do not pull horizontally on the wires!

  7. Razer Blade Stealth 2017 Speaker Replacement: 步骤 7 中的图像 1,2 Razer Blade Stealth 2017 Speaker Replacement: 步骤 7 中的图像 2,2
    • Use a Phillips #00 to remove the two, 4mm screws on each speaker.

  8. Razer Blade Stealth 2017 Speaker Replacement: 步骤 8 中的图像 1,3 Razer Blade Stealth 2017 Speaker Replacement: 步骤 8 中的图像 2,3 Razer Blade Stealth 2017 Speaker Replacement: 步骤 8 中的图像 3,3
    • Use a plastic spudger to pry the speaker(s) away from the chassis.

    • The speakers are glued to the chassis, making them difficult to remove.

    • The same process is used for both speakers.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Helene Willits

于2019年10月10日注册

718 声望

创作了6篇指南

团队

Cal Poly, Team S11-G3, Regan Fall 2019 Cal Poly, Team S11-G3, Regan Fall 2019 的会员

CPSU-REGAN-F19S11G3

4 名成员

创作了7篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 3

过去 30 天: 10

总计 906