修复你的物品 社区 商店

Razer Barracuda X Motherboard Replacement

你所需要的

  1. Razer Barracuda X Motherboard Replacement, Motherboard: 步骤 1 中的图像 1，2 Razer Barracuda X Motherboard Replacement, Motherboard: 步骤 1 中的图像 2，2

    • Remove the cushion by pulling it off from the edge and out from the grooves, Continue to pull the cushion away from the speaker until the cushion is fully separated.

    编辑

  2. Razer Barracuda X Motherboard Replacement: 步骤 2 中的图像 1，3 Razer Barracuda X Motherboard Replacement: 步骤 2 中的图像 2，3 Razer Barracuda X Motherboard Replacement: 步骤 2 中的图像 3，3

    • Using a Phillips #0 screwdriver to unscrew the four screws that attach the two pieces of the right speaker together.

    • Gently lift the plastic plate away from the housing, with care not to damage the connected wire.

    编辑

  4. Razer Barracuda X Motherboard Replacement: 步骤 3 中的图像 1，1

    • Using a Phillips #0 screwdriver, remove the single screw attaching the volume spinner to the motherboard.

    • Remove the spinner.

    编辑

  5. Razer Barracuda X Motherboard Replacement: 步骤 4 中的图像 1，1

    • Remove the Phillips #0 screws securing the I/O board from the bottom shell of the right speaker.

    编辑

  6. Razer Barracuda X Motherboard Replacement: 步骤 5 中的图像 1，2 Razer Barracuda X Motherboard Replacement: 步骤 5 中的图像 2，2
    在这个步骤中使用的工具：
    Tweezers
    $4.99
    购买

    • To fully remove the I/O board from the right speaker, use tweezers to unplug the ribbon cable attaching the I/O board to the main motherboard.

    编辑

  7. Razer Barracuda X Motherboard Replacement: 步骤 6 中的图像 1，1

    • Using the same Philips #0 screwdriver, remove the four screws attaching the motherboard to the plastic housing. Once those screws are removed, remove the main motherboard and replace it.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与4其他贡献者

Josiah Cassidy

于10/26/22注册

241 声望

创作了2篇指南

徽章: 7

+ 4更多徽章

团队

UMass Dartmouth, Team 2-3, Petersen Fall 2022 UMass Dartmouth, Team 2-3, Petersen Fall 2022 的会员

UMASSD-PETERSEN-F22S2G3

4 名成员

创作了7篇指南

3条评论

Now if I could just find somewhere to buy the I/O board. My volume slider is crackling and sometimes one cup is louder than the other.

Michael Nugent - 回复

You ever find a replacement?

Gaelan Garrett -

@michaelnugent My volume wheel just broke too! Must be a weak point in the design.

Michael Shu - 回复

添加评论

浏览统计数据:

过去 24 小时： 11

过去 7 天： 57

过去 30 天： 207

总计 3,098