Rain-X Chipped Windshield Repair

简介

This guide is applicable for any chip that is considered a star, flower, b.b. chip, and bull's-eye. It is not recommended for a spider crack (without air pocket), surface damage, or a regular crack.

Preparatory Steps

1) Purchase the Rain-X Windshield Repair Kit

2) Move the vehicle to a dry and covered space, aim for room temperature.

3) Wash and dry the windshield completely.

你所需要的

步骤 1 Rain-X Chipped Windshield Repair

Rain-X Chipped Windshield Repair, Rain-X Chipped Windshield Repair: 步骤 1 中的图像 1，3

Rain-X Chipped Windshield Repair, Rain-X Chipped Windshield Repair: 步骤 1 中的图像 2，3

Rain-X Chipped Windshield Repair, Rain-X Chipped Windshield Repair: 步骤 1 中的图像 3，3

To remove excess glass, scrape over the surface of the chip with the included razor blade.

翻译

步骤 2

Attach the Rain-X applicator base to the windshield, with the center of the base directly above the chip.

翻译

步骤 3

Cut the tip of the repair resin bottle using the razor blade.

翻译

步骤 4

Rain-X Chipped Windshield Repair: 步骤 4 中的图像 3，3

To attach resin chamber, screw the chamber into the center ring of the applicator base.

翻译

步骤 5

Screw the resin chamber clockwise until it is in contact with the windshield.

翻译

步骤 6

Rain-X Chipped Windshield Repair: 步骤 6 中的图像 3，3

Apply 3-6 drops of resin from the resin repair bottle into the resin chamber.

翻译

步骤 7

Rain-X Chipped Windshield Repair: 步骤 7 中的图像 3，3

To add the pressure driver, screw the driver clockwise into the resin chamber.
Make sure to tighten almost all the way.
Make sure the pressure driver is in contact with the windshield.

翻译

步骤 8

Set timer for 4-6 minutes - Let the adhesive absorb into the chip for 4-6 minutes.
To determine if the repair resin has absorbed properly, look at the glass from a 45 degree angle.
After the 4-6 minutes end, unscrew the pressure driver, turning it counter clockwise. Remove it to release any trapped air.