修复你的物品 社区 商店

RYOBI P422 Body Replacement

你所需要的

  1. RYOBI P422 Body Replacement, Battery and Handle: 步骤 1 中的图像 1，2 RYOBI P422 Body Replacement, Battery and Handle: 步骤 1 中的图像 2，2

    • To remove the battery press down on the two buttons located on each side of the battery and pull away from the body of the grinder.

    • To remove the handle hold grinder with one hand and use the other hand to unscrew the handle with a counter-clockwise motion

    编辑

  2. RYOBI P422 Body Replacement, Body: 步骤 2 中的图像 1，1

    • Lay the grinder flat on its side so the screws are facing up.

    编辑

  3. RYOBI P422 Body Replacement: 步骤 3 中的图像 1，3 RYOBI P422 Body Replacement: 步骤 3 中的图像 2，3 RYOBI P422 Body Replacement: 步骤 3 中的图像 3，3

    • Remove the four 1.8 cm screws from the lower and mid section of the body with the Torx T20 screwdriver.

    • Remove the 3.7 cm screws from the upper section of the body, with the same screwdriver.

    编辑

  5. RYOBI P422 Body Replacement: 步骤 4 中的图像 1，2 RYOBI P422 Body Replacement: 步骤 4 中的图像 2，2

    • Now that the two halves are unscrewed, lift up the top half.

    编辑

  6. RYOBI P422 Body Replacement: 步骤 5 中的图像 1，3 RYOBI P422 Body Replacement: 步骤 5 中的图像 2，3 RYOBI P422 Body Replacement: 步骤 5 中的图像 3，3

    • Remove the safety trigger and the spring.

    • Be careful in removing the safety trigger, the pin may fall out as you are moving it.

    编辑

  7. RYOBI P422 Body Replacement: 步骤 6 中的图像 1，2 RYOBI P422 Body Replacement: 步骤 6 中的图像 2，2

    • Lift up main trigger and spring together.

    • By lifting this trigger and spring out of the handle, you will pull double duty by lifting the black switch box off of its two support posts.

    • Slide the trigger off of the black switch box.

    • Be careful when removing trigger, the spring will be compressed and may move unexpectedly.

    编辑

  8. RYOBI P422 Body Replacement: 步骤 7 中的图像 1，3 RYOBI P422 Body Replacement: 步骤 7 中的图像 2，3 RYOBI P422 Body Replacement: 步骤 7 中的图像 3，3

    • Lift the battery lead bracket from its slot.

    • Use the PH 1 screwdriver to unscrew the two 0.7 cm screws that hold the 2.6 cm long brass bracket in place.

    • Use tweezers to remove the brass bracket.

    • During reassembly, remember to keep the spring inside the main trigger and against the bracket that is visible in the second of the accompanying photos.

    编辑

  9. RYOBI P422 Body Replacement: 步骤 8 中的图像 1，2 RYOBI P422 Body Replacement: 步骤 8 中的图像 2，2

    • Flip the grinder over and lift off the second half of the body.

    • Now you can replace your damaged handles with a new pair.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与4其他贡献者

John Lamanuzzi

于03/20/15注册

229 声望

创作了2篇指南

徽章: 9

+ 6更多徽章

团队

UMass Dartmouth, Team 3-6, Duarte Spring 2015 UMass Dartmouth, Team 3-6, Duarte Spring 2015 的会员

UMASSD-DUARTE-S15S3G6

3 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 6

总计 1,377