修复你的物品 社区 商店

RIDGID R84015 X2 Planetary Gear Replacement Guide

简介

Follow these steps to disassemble the drill and replace the planetary gear for the RIDGID R84015 X2 power drill.

你所需要的

  1. RIDGID R84015 X2 Planetary Gear Replacement Guide, RIDGID R84015 X2 Case Removal: 步骤 1 中的图像 1，2 RIDGID R84015 X2 Planetary Gear Replacement Guide, RIDGID R84015 X2 Case Removal: 步骤 1 中的图像 2，2

    • Remove the backplate.

    • Using a Torx T20 screwdriver, remove the four screws attaching the back plate.

    编辑

  2. RIDGID R84015 X2 Planetary Gear Replacement Guide: 步骤 2 中的图像 1，1

    • Remove the drill handle.

    • Using the Phillips #2 screwdriver, remove the five screws attaching the drill handle to the body.

    编辑

  3. RIDGID R84015 X2 Planetary Gear Replacement Guide: 步骤 3 中的图像 1，2 RIDGID R84015 X2 Planetary Gear Replacement Guide: 步骤 3 中的图像 2，2

    • Remove the gear casing from the body.

    • Using the Philips #2 screwdriver, remove the four screws attaching the gear casing to the body.

    编辑

  5. RIDGID R84015 X2 Planetary Gear Replacement Guide, Planetary Gear: 步骤 4 中的图像 1，1

    • Prepare to remove the gear chamber.

    • Using the Phillips #2 screwdriver, unscrew the four screws at the rear of the plastic gear chamber.

    编辑

  6. RIDGID R84015 X2 Planetary Gear Replacement Guide: 步骤 5 中的图像 1，2 RIDGID R84015 X2 Planetary Gear Replacement Guide: 步骤 5 中的图像 2，2

    • Remove the motor from the drill by gently pulling the motor away from the gear chamber.

    • NOTE: Handle the gear chamber with caution as the gears are now loose.

    编辑

  7. RIDGID R84015 X2 Planetary Gear Replacement Guide: 步骤 6 中的图像 1，1

    • Remove the plastic gear chamber.

    • Using the Phillips #2 screwdriver, remove the four screws that attach the plastic gear chamber.

    编辑

  8. RIDGID R84015 X2 Planetary Gear Replacement Guide: 步骤 7 中的图像 1，2 RIDGID R84015 X2 Planetary Gear Replacement Guide: 步骤 7 中的图像 2，2

    • Remove each component from the gear assembly. Replace components as needed.

    • Reassemble the drill following the gear replacement instructions in reverse order.

    编辑
终点

4等其他人完成本指南。

作者

与10其他贡献者

Evan Long

于04/15/10注册

262 声望

创作了4篇指南

徽章: 8

+ 5更多徽章

团队

Cal Poly, Team 15-48, Garner Spring 2010 Cal Poly, Team 15-48, Garner Spring 2010 的会员

CPSU-GARNER-S10S15G48

6 名成员

创作了10篇指南

一条评论

Very helpful, thank you! I was not sure how to detach the motor from the gearbox and didn't want to apply any brute force, and this explained it well.

YURIY - 回复

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 2

过去 30 天： 14

总计 6,216