修复你的物品 社区 商店

RIDGID Belt Sander R2740 Power Cord Replacement

简介

If your RIDGID Belt Sander R2740 doesn’t have power the cause could be from a faulty power cord. This guide will teach you how to replace a power cord on a RIDGID Belt Sander R2740 . For this guide, you will need a screwdriver with a T10, T20 and a Phillips #3 head.

你所需要的

  1. RIDGID Belt Sander R2740 Power Cord Replacement, Power Cord: 步骤 1 中的图像 1，2 RIDGID Belt Sander R2740 Power Cord Replacement, Power Cord: 步骤 1 中的图像 2，2

    • Orient the belt sander so that the RIDGID logo is facing you.

    • Remove the six 19 mm and three 51 mm T20 screws that hold the cover into place.

    • Remove the cover from the belt sander.

    • Make sure you remember the correct placement of each screw.

    编辑

  3. RIDGID Belt Sander R2740 Power Cord Replacement: 步骤 2 中的图像 1，2 RIDGID Belt Sander R2740 Power Cord Replacement: 步骤 2 中的图像 2，2

    • Remove the two 16 mm T10 screws.

    • Remove the support bracket that holds the power cord into place.

    编辑

  4. RIDGID Belt Sander R2740 Power Cord Replacement: 步骤 3 中的图像 1，3 RIDGID Belt Sander R2740 Power Cord Replacement: 步骤 3 中的图像 2，3 RIDGID Belt Sander R2740 Power Cord Replacement: 步骤 3 中的图像 3，3

    • Lift the power cord from the resting grooves.

    • Rotate the switch so that the lock-on button is facing you.

    • Loosen the two 8 mm Phillips #3 screws.

    • Pull the two wires away from the switch.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 2

过去 30 天： 13

总计 685