跳转到主内容

配件

没有特定配件。

  1. 这个步骤还没有翻译 帮忙翻译一下

    Remove the small black screws along the edges of the control panel on the top of the device. Pry off the top control panel using the plastic wedge tool. Remove the screw from the front, gray panel located beneath the "Scene Select AE" label.
    • Remove the small black screws along the edges of the control panel on the top of the device.

    • Pry off the top control panel using the plastic wedge tool.

    • Remove the screw from the front, gray panel located beneath the "Scene Select AE" label.

    • Remove the two small black screws on the top of the front, gray panel of the device, above the red AUTOFOCUS letters.

  2. 这个步骤还没有翻译 帮忙翻译一下

    Turn the device over and remove the two screws securing the front panel of the device.
    • Turn the device over and remove the two screws securing the front panel of the device.

    • Remove the screw securing the primary viewfinder, along the front of the camera.

    • Using a flat plastic tool, pry the entire front panel away from the device.

  3. 这个步骤还没有翻译 帮忙翻译一下

    Gently unplug the grey cord, located underneath the panel, disconnecting the speaker from the inner component of the device. Remove the speaker from the device.
    • Gently unplug the grey cord, located underneath the panel, disconnecting the speaker from the inner component of the device.

    • Remove the speaker from the device.

终点

Allison Baudoin

于2011年12月05日注册

401 信誉积分

创作了4篇指南

团队

James Madison, Team 2-1, Allen Fall 2011 James Madison, Team 2-1, Allen Fall 2011 的会员

JMU-ALLEN-F11S2G1

2 名成员

创作了4篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 4

过去的30天: 11

总计 802