跳转到主内容

RCA Pro10 Edition Display Screen Replacement

你所需要的

  1. RCA Pro10 Edition Display Screen Replacement, Speaker: 步骤 1 中的图像 1,2 RCA Pro10 Edition Display Screen Replacement, Speaker: 步骤 1 中的图像 2,2
    • Using a separating tool, look for a seam in the plastic casing that looks most accessible.

    • Use the prying tool to separate the front and back casing, working your way around the perimeter.

    • Utilize a card tool or a pick to assist in keeping the case separated.

    • To reassemble the device simply align the two casing halves and pinch to snap together or press down on the edges while the device in on a table.

  2. RCA Pro10 Edition Display Screen Replacement: 步骤 2 中的图像 1,1
    • Flip over the back of the device while keeping it close to the front, the speaker is attached to it.

    • Remove the yellow tape securing the speaker to the back casing.

  3. RCA Pro10 Edition Display Screen Replacement: 步骤 3 中的图像 1,2 RCA Pro10 Edition Display Screen Replacement: 步骤 3 中的图像 2,2
    • Use the separating tool to pry the speaker from its surface.

    • Use caution when removing the speaker, you may damage the screen.

    • Cut or desolder the wires to replace or repair the speaker.

  4. RCA Pro10 Edition Display Screen Replacement, Camera: 步骤 4 中的图像 1,3 RCA Pro10 Edition Display Screen Replacement, Camera: 步骤 4 中的图像 2,3 RCA Pro10 Edition Display Screen Replacement, Camera: 步骤 4 中的图像 3,3
    • Using a P00 Phillips screwdriver, remove the three screws securing the black plastic camera housing and remove it.

    • Peel back the beige tape while holding down the camera ribbon cable to prevent tears

  5. RCA Pro10 Edition Display Screen Replacement: 步骤 5 中的图像 1,2 RCA Pro10 Edition Display Screen Replacement: 步骤 5 中的图像 2,2
    • Lift the locking tab that is securing the camera ribbon cable.

    • Slide the ribbon cable out from the connector and remove from casing.

  6. RCA Pro10 Edition Display Screen Replacement, Power/Volume Buttons: 步骤 6 中的图像 1,1
    • Use a P00 Phillips screwdriver to remove the three screws securing the button board.

    • Desolder the contacts on the button board to remove or replace it.

  7. RCA Pro10 Edition Display Screen Replacement, Battery: 步骤 7 中的图像 1,2 RCA Pro10 Edition Display Screen Replacement, Battery: 步骤 7 中的图像 2,2
    • Peel off the black tape on the battery and main-board.

    • Peel off the black tape securing the screen ribbon cable to the back of the screen.

    • Use caution to avoid damaging either ribbon cable.

  8. RCA Pro10 Edition Display Screen Replacement: 步骤 8 中的图像 1,2 RCA Pro10 Edition Display Screen Replacement: 步骤 8 中的图像 2,2
    • Slide out the ribbon cable lock that is securing the screen ribbon cable.

    • Move the ribbon cable out of the way using tape if necessary.

  9. RCA Pro10 Edition Display Screen Replacement: 步骤 9 中的图像 1,2 RCA Pro10 Edition Display Screen Replacement: 步骤 9 中的图像 2,2
    在这个步骤中使用的工具:
    Plastic Cards
    $2.99
    购买
    • Remove the yellow tape securing the battery to the screen.

    • Use a plastic card or pick to separate the battery from the screen.

    • Do not bend or puncture battery, battery is difficult to separate from screen.

    • Cut or desolder the wires on the battery to remove or replace it.

  10. RCA Pro10 Edition Display Screen Replacement, Display Screen: 步骤 10 中的图像 1,1
    • Peel the WiFi antenna off of the monitor and move out of the way.

  11. RCA Pro10 Edition Display Screen Replacement: 步骤 11 中的图像 1,3 RCA Pro10 Edition Display Screen Replacement: 步骤 11 中的图像 2,3 RCA Pro10 Edition Display Screen Replacement: 步骤 11 中的图像 3,3
    • Remove the black tape on the screen and the main-board.

    • Lift the ribbon cable lock securing the digitizer ribbon cable.

    • Slide out the digitizer ribbon cable and move away from the device, use tape to secure if necessary.

  12. RCA Pro10 Edition Display Screen Replacement: 步骤 12 中的图像 1,1
    • Use a P00 Phillips screwdriver to remove the three screws securing the main-board to the back casing.

  13. RCA Pro10 Edition Display Screen Replacement: 步骤 13 中的图像 1,3 RCA Pro10 Edition Display Screen Replacement: 步骤 13 中的图像 2,3 RCA Pro10 Edition Display Screen Replacement: 步骤 13 中的图像 3,3
    • Lift the main-board up and away from the ports to reveal the microphone.

    • Use tweezers to remove the microphone from the black silicone.

    • Move the main-board off the screen.

  14. RCA Pro10 Edition Display Screen Replacement: 步骤 14 中的图像 1,2 RCA Pro10 Edition Display Screen Replacement: 步骤 14 中的图像 2,2
    • Use a separator tool to lift the screen from the port side of the casing and remove it.

    • To reassemble the device, follow these steps in reverse unless specified otherwise.

结论

To reassemble your device, follow these instructions in reverse order.

9等其他人完成本指南。

Tyler Schuster

于01/27/15注册

476 声望

撰写一个指南

团队

Pasco Hernando, Team 1-1, Prince Winter 2015 Pasco Hernando, Team 1-1, Prince Winter 2015 的会员

PHSC-PRINCE-W15S1G1

6 名成员

创作了10篇指南

4条评论

Gracias y ademas la buenas fotografias ayudaron una inmesidad.

Kl

Klaus laage - 回复

Nothing spectacular happened I just turned on my tablet today and voila! My display is crazed on part of the screen! I read these steps a couple times and I just don't understand how if this process is intended to replace the display screen a display screen isn't listed as a necessary part purchase. I have faith in reader generated sites so please help!

Denise Engle - 回复

Denise a new display screen would need to be purchased. Unless you absolutely have to have this particular tablet fixed I suggest buying a new one.

Chris Blackwell -

hola, podrás tener este repuesto de la pantalla lcd para la venta para ese modelo?

gracias

William Weygel

williamw666@hotmail.com

William Weygel - 回复

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 2

总计 6,231