跳转到主内容

简介

Replacing the onboard speaker for the RCA CC310.

  1. RCA CC310 Onboard Speaker Replacement, Disassembling RCA CC310 Left Cover: 步骤 1 中的图像 1,2 RCA CC310 Onboard Speaker Replacement, Disassembling RCA CC310 Left Cover: 步骤 1 中的图像 2,2
    • Remove the six 7.9mm Phillips #0 screws on the back and bottom.

    • Remove the one 3.8mm Phillips #0 screw on the bottom.

    • Remove the two 7.5mm Phillips #0 screws on the back and bottom.

  2. RCA CC310 Onboard Speaker Replacement: 步骤 2 中的图像 1,2 RCA CC310 Onboard Speaker Replacement: 步骤 2 中的图像 2,2
    • Remove 5.8mm Phillips #1 screw from the side button panel.

    • Slide the viewfinder all the way to the right and remove the 7.9mm Phillips #0 screw.

  3. RCA CC310 Onboard Speaker Replacement: 步骤 3 中的图像 1,2 RCA CC310 Onboard Speaker Replacement: 步骤 3 中的图像 2,2
    • Pry along the seam on the top side near the buttons with a spudger.

  4. RCA CC310 Onboard Speaker Replacement: 步骤 4 中的图像 1,2 RCA CC310 Onboard Speaker Replacement: 步骤 4 中的图像 2,2
    • Pull the left panel away from the rest of the camcorder.

    • Unplug the red speaker cable located at the rear of the device.

    • Be careful to not pull too hard. The speaker cable is still connected to the panel and it can rip.

  5. RCA CC310 Onboard Speaker Replacement, Onboard Speaker: 步骤 5 中的图像 1,2 RCA CC310 Onboard Speaker Replacement, Onboard Speaker: 步骤 5 中的图像 2,2
    • Unplug the red cable connecting the speaker to the motherboard.

  6. RCA CC310 Onboard Speaker Replacement: 步骤 6 中的图像 1,2 RCA CC310 Onboard Speaker Replacement: 步骤 6 中的图像 2,2
    • Locate the speaker on the removed panel. Find the groove on the top left side of the speaker.

    • Pry the plastic up with a spudger until the glue breaks and the speaker is detached.

  7. RCA CC310 Onboard Speaker Replacement: 步骤 7 中的图像 1,1
    • Break the plastic pieces holding the cable to the panel.

    • Glue the new cables, with a hot glue gun, back to the panel after replacing the speaker.

  8. RCA CC310 Onboard Speaker Replacement: 步骤 8 中的图像 1,3 RCA CC310 Onboard Speaker Replacement: 步骤 8 中的图像 2,3 RCA CC310 Onboard Speaker Replacement: 步骤 8 中的图像 3,3
    • Glue the new speaker to the panel.

    • Plug the cable back into the motherboard.

结论

To reassemble your device, follow these instructions in reverse order.

Oliver Adams

于2011年01月19日注册

629 声望分

创作了6篇指南

团队

Cal Poly, Team 5-20, Amido Winter 2011 Cal Poly, Team 5-20, Amido Winter 2011 的会员

CPSU-AMIDO-W11S5G20

4 名成员

创作了7篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 3

总计 907