跳转到主内容

RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement

你所需要的

  1. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement, Backplate: 步骤 1 中的图像 1,3 RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement, Backplate: 步骤 1 中的图像 2,3 RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement, Backplate: 步骤 1 中的图像 3,3
    • Remove the three Phillips #00 screws at the bottom of the device.

  2. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: 步骤 2 中的图像 1,2 RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: 步骤 2 中的图像 2,2
    • Remove the two Phillips #00 screws to the left and right of the keyboard connector.

  3. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: 步骤 3 中的图像 1,1
    • Pull on one of the bottom corners to begin to pull off the back plate.

  4. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: 步骤 4 中的图像 1,2 RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: 步骤 4 中的图像 2,2
    • Work around the outside of the chassis, using the spudger to pry the backplate off.

    • After doing this for about half the device, the backplate should pop right off.

  5. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement, Battery: 步骤 5 中的图像 1,1
    • Remove the tape over the connectors on the motherboard and other side of the battery.

  6. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: 步骤 6 中的图像 1,1
    • Disconnect the red and black keyboard wires connecting the battery to the motherboard.

  7. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: 步骤 7 中的图像 1,1
    • Disconnect the black ribbon cable running over the battery. Flip up the black clamp and pull the cable out.

  8. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: 步骤 8 中的图像 1,2 RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: 步骤 8 中的图像 2,2
    • Remove the cable over the battery connecting the motherboard and the power connector.

    • Flip up the black clamp and pull the cable out.

  9. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: 步骤 9 中的图像 1,2 RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: 步骤 9 中的图像 2,2
    • Pull out battery. It is taped to the device so it is safe to pull out.

    • Look for damage to the battery. If damaged, make sure to not get any acid on your fingers.

  10. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement, Antenna: 步骤 10 中的图像 1,1
    • Identify the grey wire on the right side of the device.

  11. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: 步骤 11 中的图像 1,1
    • Remove the orange ribbon cable over the wire.

  12. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: 步骤 12 中的图像 1,1
    • Remove the antenna using a soldering iron.

  13. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement, Motherboard: 步骤 13 中的图像 1,1
    • Remove the blue and black wire from the top of the motherboard.

  14. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: 步骤 14 中的图像 1,1
    • Remove the screws from the motherboard.

  15. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: 步骤 15 中的图像 1,1
    • Remove the motherboard.

结论

To reassemble your device, follow these instructions in reverse order.

Marcus Elysee

于10/25/19注册

97 声望

撰写一个指南

团队

UMass Dartmouth, Team S1-G8, O'Connell Fall 2019 UMass Dartmouth, Team S1-G8, O'Connell Fall 2019 的会员

UMASSD-O'CONNELL-F19S1G8

3 名成员

创作了4篇指南

一条评论

Where can I buy this motherboard?

waymond everett - 回复

添加评论

浏览统计数据:

过去 24 小时: 1

过去 7 天: 13

过去 30 天: 33

总计 1,330