RCA 10 Viking Pro RCT6K03W13 Battery Replacement

步骤 1 Backplate




• Remove the three Phillips #00 screws at the bottom of the device.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 2



• Remove the two Phillips #00 screws to the left and right of the keyboard connector.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 3
• Pull on one of the bottom corners to begin to pull off the back plate.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 4
• Work around the outside of the chassis, using the spudger to pry the backplate off.
• After doing this for about half the device, the backplate should pop right off.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 5 Battery
• Remove the tape over the connectors on the motherboard and other side of the battery.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 6
• Disconnect the red and black keyboard wires connecting the battery to the motherboard.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 7
• Disconnect the black ribbon cable running over the battery. Flip up the black clamp and pull the cable out.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 8
• Remove the cable over the battery connecting the motherboard and the power connector.
• Flip up the black clamp and pull the cable out.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 9
• Pull out battery. It is taped to the device so it is safe to pull out.
• Look for damage to the battery. If damaged, make sure to not get any acid on your fingers.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论

作者

与2其他贡献者

Ryan Wickett

于10/25/19注册

632 声望

创作了3篇指南

徽章: 11

• 
• 
• 

+ 8更多徽章

团队

UMass Dartmouth, Team S1-G8, O'Connell Fall 2019 UMass Dartmouth, Team S1-G8, O'Connell Fall 2019 的会员

UMASSD-O'CONNELL-F19S1G8

3 名成员

创作了4篇指南

嵌入本指南

选择一个尺寸并复制下面的代码，将本指南作为一个小插件嵌入到你的网站/论坛中。

预览