简介

A missing or broken pull on a zipper can make life difficult when you try to open and close your Patagonia jacket. This guide will show you a quick-fix method you can use in the field or as an interim solution until you can replace your slider. Don't have a zipper pull? A loop of very thin cord or string will not only work, but make MacGuyver proud.

For replacement parts or further assistance, contact Patagonia Customer Service.

工具

无需工具。

配件

  1. Grab your zipper pull. Thread the cord of the zipper pull through the hole on the slider where the pull used to be. Thread the cord of the zipper pull through the hole on the slider where the pull used to be.
    • Grab your zipper pull.

    • Thread the cord of the zipper pull through the hole on the slider where the pull used to be.

  2. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  3. Make a loop with the cord that has passed through the hole. Feed the rubber end through the loop.
    • Make a loop with the cord that has passed through the hole.

    • Feed the rubber end through the loop.

  4. Pull the rubber part through the loop, then pull it tight. Pull the rubber part through the loop, then pull it tight. Pull the rubber part through the loop, then pull it tight.
    • Pull the rubber part through the loop, then pull it tight.

终点

4等其他人完成本指南。

Brittany McCrigler

于2012年03月05日注册

80,640 信誉积分

创作了132篇指南

团队

iFixit iFixit 的会员

Community

109 名成员

创作了7,717篇指南

浏览统计数据:

过去的24小时: 8

过去的7天: 48

过去的30天: 166

总计 7,034