修复你的物品 社区 商店

Quantum View 10.1 camera Replacement

你所需要的

  1. Quantum View 10.1 camera Replacement, Open Quantum View case: 步骤 1 中的图像 1，1

    • Start by turning the tablet over with the screen down. Carefully use a plastic opening tool to pry the cover off. Start from the corner opposite the hibernate button.

    编辑

  2. Quantum View 10.1 camera Replacement, Removing the electrical tape and magnets.: 步骤 2 中的图像 1，2 Quantum View 10.1 camera Replacement, Removing the electrical tape and magnets.: 步骤 2 中的图像 2，2

    • Pick up the magnets from the bottom edge of the tablet next to the keyboard connection and put them in a place that they will not get lost. Then carefully remove all 4 strips of electrical tape.

    编辑

  4. Quantum View 10.1 camera Replacement, Unhooking the battery: 步骤 3 中的图像 1，2 Quantum View 10.1 camera Replacement, Unhooking the battery: 步骤 3 中的图像 2，2

    • Using a small plastic opening tool; genteelly pull the connection off of the motherboard.

    编辑

    • Remove yellow plastic and carefully pull clip away from connection.

    编辑

  6. Quantum View 10.1 camera Replacement, Remove camera clip: 步骤 5 中的图像 1，2 Quantum View 10.1 camera Replacement, Remove camera clip: 步骤 5 中的图像 2，2

    • Remove yellow tape.

    • Unclip ribbon connector.

    编辑

  7. Quantum View 10.1 camera Replacement, Remove camera: 步骤 6 中的图像 1，2 Quantum View 10.1 camera Replacement, Remove camera: 步骤 6 中的图像 2，2

    • Unscrew plastic camera holder using a PH00 screwdriver bit.

    • Release the plastic holder tab and remove camera.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 2

过去 30 天： 4

总计 149