修复你的物品 社区 商店

Protocol Galileo Stealth Housing Replacement

简介

This guide will walk you through how to separate the upper and lower housing units of the drone. Minimal tooling is required; however, prerequisite steps are required. This guide is useful for accessing internal components of the drone.

你所需要的

  1. Protocol Galileo Stealth Housing Replacement, Propeller: 步骤 1 中的图像 1，1

    • Remove the chrome shaft cover by lightly pulling it away from the drone.

    编辑

  2. Protocol Galileo Stealth Housing Replacement: 步骤 2 中的图像 1，1

    • Using a Phillips #000 screwdriver, remove the 7mm screw from the propeller stop.

    • Be sure to apply adequate pressure when removing the screw to prevent stripping it out.

    编辑

  4. Protocol Galileo Stealth Housing Replacement: 步骤 3 中的图像 1，1

    • Remove the propeller stop from shaft by lightly pulling it away from the drone.

    编辑

  5. Protocol Galileo Stealth Housing Replacement: 步骤 4 中的图像 1，1

    • Remove the propeller from shaft by lightly pulling it away from the drone.

    编辑

  6. Protocol Galileo Stealth Housing Replacement, Housing: 步骤 5 中的图像 1，2 Protocol Galileo Stealth Housing Replacement, Housing: 步骤 5 中的图像 2，2

    • Remove the 8mm long Phillips #0 screws (24 total) from the lower housing unit.

    • Take care to place the screws in a safe place to prevent losing them.

    编辑

  7. Protocol Galileo Stealth Housing Replacement: 步骤 6 中的图像 1，1

    • Separate the upper and lower housing units by lightly pulling the two housing units apart.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与3其他贡献者

Matthew Selting

于02/15/18注册

432 声望

创作了4篇指南

徽章: 6

+ 3更多徽章

团队

UW Stout, Team S8-G4, Ogden Spring 2018 UW Stout, Team S8-G4, Ogden Spring 2018 的会员

UWSTOUT-OGDEN-S18S8G4

4 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 4

过去 30 天： 4

总计 128