简介
The Protocol Dronium 3x rotor guards are responsible for protecting the drone's props. Additional rotor guards are included with the Dronium 3x.
你所需要的
-
-
Set the drone upright.
-
Using the Phillips #0 screwdriver, remove the 6mm screw from each corner of the drone.
-
Place the rotor guards aside and replace with guards of choice.
-
-
即将完成！
To reassemble your device, follow these instructions in reverse order.
结论
To reassemble your device, follow these instructions in reverse order.
团队
Washington State, Team S29-G7, Hope Fall 2018 Washington State, Team S29-G7, Hope Fall 2018 的会员
WSU-HOPE-F18S29G7
3 名成员
创作了4篇指南
