修复你的物品 社区 商店

Proscan Tablet Touch Screen Replacement

你所需要的

  1. Proscan Tablet Touch Screen Replacement, Touch Screen: 步骤 1 中的图像 1，1

    • Tools necessary for task.

    • Starting from the left to right

    • Metal Spudyer

    • Plastic opening tool

    • Precision tweezer

    • Point pen tool

    • Driver with bit size J0

    翻译

  2. Proscan Tablet Touch Screen Replacement: 步骤 2 中的图像 1，1

    • The backing of the tablet is fastened by simply snapping it in. Using the metal opening tool, pry between the plastic backing and the edge, but do not remove it yet. Work your way around until you have them separated.

    翻译

  3. Proscan Tablet Touch Screen Replacement: 步骤 3 中的图像 1，1

    • Once you have finished going around the edges of the tablet, look inside.

    翻译

  4. Proscan Tablet Touch Screen Replacement: 步骤 4 中的图像 1，1

    • You will notice two wires still connecting the backing to the computer. These are for the speakers.

    翻译

  6. Proscan Tablet Touch Screen Replacement: 步骤 5 中的图像 1，1

    • You can remove the speakers with your hands to free the backing completely.

    翻译

  7. Proscan Tablet Touch Screen Replacement: 步骤 6 中的图像 1，1

    • Next the following highlighted spots are screws. These screws must be loosened to separate the motherboard and digitizer from the outer glass components. Remember lefty loosely, righty tighty. All screws were placed on a magnet board to ensure they did not roll away

    翻译

  8. Proscan Tablet Touch Screen Replacement: 步骤 7 中的图像 1，1

    • There is some tape wire that links the screen to the grey digitizer. This can be gently pulled apart by the tweezers

    翻译

  9. Proscan Tablet Touch Screen Replacement: 步骤 8 中的图像 1，1

    • Next focus on the camera and volume components along the edges highlighted here. The screws have already been taken out, gently pull them off.

    翻译

  10. Proscan Tablet Touch Screen Replacement: 步骤 9 中的图像 1，1

    • Gently lift the green motherboard from the grey digitizer to ensure that all screws have been removed. The only connection remaining should be a tape wire to the battery.

    翻译

  11. Proscan Tablet Touch Screen Replacement: 步骤 10 中的图像 1，1

    • The last step is to remove the grey digitizer from the screen entirely. Note that the blue battery and green motherboard will still be attached, move them as one part

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

作者

与4其他贡献者

Cameron Denny

于10/23/15注册

321 声望

创作了2篇指南

徽章: 6

+ 3更多徽章

团队

University of Memphis, Team 3-3, Kim Fall 2015 University of Memphis, Team 3-3, Kim Fall 2015 的会员

UM-KIM-F15S3G3

4 名成员

创作了4篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 5

过去 30 天： 13

总计 5,547