修复你的物品 社区 商店

Propel Star Wars T-65 X-Wing Drone Remote Control Battery Replacement

简介

Is your drone controller not lighting up? A possible cause could be dead batteries. Follow these steps to learn how to replace the batteries. No tools are required because the screwdriver in included in the remote control.

  1. Propel Star Wars T-65 X-Wing Drone Remote Control Battery Replacement, Remote Control Battery: 步骤 1 中的图像 1，1

    • On the right side of the controller, slide the small screw driver out.

    编辑

  2. Propel Star Wars T-65 X-Wing Drone Remote Control Battery Replacement: 步骤 2 中的图像 1，1

    • Flip the controller over, so the black panels are facing up.

    编辑

  4. Propel Star Wars T-65 X-Wing Drone Remote Control Battery Replacement: 步骤 3 中的图像 1，2 Propel Star Wars T-65 X-Wing Drone Remote Control Battery Replacement: 步骤 3 中的图像 2，2

    • Unscrew the small screw on the left bottom side. The screw should be on the plastic piece that has an upwards facing arrow.

    • Repeat for the screw on the bottom right hand side.

    编辑

  5. Propel Star Wars T-65 X-Wing Drone Remote Control Battery Replacement: 步骤 4 中的图像 1，1

    • Pull the plastic piece off to reveal the compartment where the batteries go.

    编辑

  6. Propel Star Wars T-65 X-Wing Drone Remote Control Battery Replacement: 步骤 5 中的图像 1，1

    • Remove the old batteries.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与2其他贡献者

Miranda Brinkley

于10/22/18注册

512 声望

创作了3篇指南

徽章: 9

+ 6更多徽章

团队

UC Davis, Team S11-G5, Lore Fall 2018 UC Davis, Team S11-G5, Lore Fall 2018 的会员

UCD-LORE-F18S11G5

3 名成员

创作了3篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 4

过去 30 天： 26

总计 2,311