修复你的物品 社区 商店

ProScan PLT7050 Battery Replacement

简介

This is the battery replacement guide for the Proscan PLT 7050. If you find the need to replace the battery, please follow these steps.

你所需要的

  1. ProScan PLT7050 Battery Replacement, Open Device: 步骤 1 中的图像 1，1

    • Make sure device is unplugged and turned off while working on the device.

    • Remove 2 Phillips head, 4.3 mm screws from the bottom side of the tablet with a PH00 screwdriver.

    编辑

  2. ProScan PLT7050 Battery Replacement: 步骤 2 中的图像 1，1

    • Use the plastic opening tools to pry the back of the tablet open.

    • You may need to slide the tool along the sides of the device to get it to open. You might hear some popping noises, it is okay.

    • May be helpful if you start by the microSD slot.

    编辑

  4. ProScan PLT7050 Battery Replacement, Battery: 步骤 3 中的图像 1，2 ProScan PLT7050 Battery Replacement, Battery: 步骤 3 中的图像 2，2

    • Use the soldering tool to remove the wires from the motherboard. (Black and Red)

    • The soldering tool is hot.

    • Take note of where the wires are located.

    编辑

  5. ProScan PLT7050 Battery Replacement: 步骤 4 中的图像 1，2 ProScan PLT7050 Battery Replacement: 步骤 4 中的图像 2，2

    • Remove the black tape from the battery.

    • Remove the three pieces of yellow tape from the battery.

    编辑

  6. ProScan PLT7050 Battery Replacement: 步骤 5 中的图像 1，1

    • Use the plastic opening tool to pry the battery from the device as it is attached by an adhesive.

    • Do not proceed if corrosion and/or swelling of the battery is visible.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 3

过去 30 天： 7

总计 961