修复你的物品 社区 商店

Princess Compact Blender Rubber Gasket Replacement

简介

By wear and tear the rubber ring underneath the blades of the blender may rip, making the blender inoperable. With the help of this repair guide you will be able to replace the ring, reassemble the blender and start making your smoothie again!

你所需要的

  1. Princess Compact Blender Rubber Gasket Replacement, Rubber Gasket: 步骤 1 中的图像 1，1

    • Lift the glass container of the motor

    • The motor is the bottom part of the blender

    • If your blender has recently been used, you may want to clean it before taking it apart

    编辑

  2. Princess Compact Blender Rubber Gasket Replacement: 步骤 2 中的图像 1，2 Princess Compact Blender Rubber Gasket Replacement: 步骤 2 中的图像 2，2

    • Unscrew the base from the glass container. The right direction is indicated by the red arrow.

    • The base is the part whereon the blades are attached

    编辑

  3. Princess Compact Blender Rubber Gasket Replacement: 步骤 3 中的图像 1，1

    • Lift metal blades with the metal hood out of the base

    • Watch out for sharp blades or wear gloves

    • Large rubber ring may fall out of the base, this is no problem, just put it back in place

    编辑

  5. Princess Compact Blender Rubber Gasket Replacement: 步骤 4 中的图像 1，2 Princess Compact Blender Rubber Gasket Replacement: 步骤 4 中的图像 2，2

    • Take the cutting blades in one hand and the black, plastic connector part in the other

    • This is where you could use the gloves

    • Unscrew the latter together with the screw-nut from the axis by twisting

    • If necessary, apply a little force to slightly pull it out

    • To unscrew, you have to twist right. The “righty tighty, lefty loosy-principle” does not apply here

    编辑

  6. Princess Compact Blender Rubber Gasket Replacement: 步骤 5 中的图像 1，1

    • Gently slide off the hood and lower, small metal protective ring from the axis and don’t lose the rubber ring!

    编辑

  7. Princess Compact Blender Rubber Gasket Replacement: 步骤 6 中的图像 1，2 Princess Compact Blender Rubber Gasket Replacement: 步骤 6 中的图像 2，2

    • Slide the broken ring off the axis

    • Replace the broken ring for a new one

    编辑

  8. Princess Compact Blender Rubber Gasket Replacement: 步骤 7 中的图像 1，3 Princess Compact Blender Rubber Gasket Replacement: 步骤 7 中的图像 2，3 Princess Compact Blender Rubber Gasket Replacement: 步骤 7 中的图像 3，3

    • Slide the remaining parts back on the axis in the following order:

    • Metal hood

    • Small metal protective ring

    • Black plastic connector

    • Screw back the screw-nut on the thread with the pliers to fasten the assembly

    • Put the blade-assembly back in the base

    编辑

  9. Princess Compact Blender Rubber Gasket Replacement: 步骤 8 中的图像 1，3 Princess Compact Blender Rubber Gasket Replacement: 步骤 8 中的图像 2，3 Princess Compact Blender Rubber Gasket Replacement: 步骤 8 中的图像 3，3

    • Twist the base back onto the glass container

    • Put the glass container on the stand (bottom part of the blender, containing the motor)

    • Start making your smoothie!

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 10

过去 30 天： 40

总计 2,977